5962-8863003VKA Datasheet, PDF (8/13 Pages) List of Unclassifed Manufacturers – MICROCIRCUIT, LINEAR, INSTRUMENTATION AMPLIFIER, MONOLITHIC SILICON

Test
Output voltage swing
Slew rate
Average input offset
voltage drift
TABLE I. Electrical performance characteristics – Continued.
Symbol
V_O
SR
TCV_IOS
Conditions 1/
-55°C ≤ T_A ≤ +125°C
unless otherwise specified
R_L = 500 Ω, 2 kΩ
R_L = 50 Ω
R_L = 500 Ω, 2 kΩ
G = 10
T_A = -55°C, +125°C
Group A Device
subgroups type
Limits
Min Max
4
All
±13
±2.5
5, 6
±12
4
01
3.5
5, 6
2.75
4
02, 03 3.0
5, 6
2.0
01
0.3
8
02, 03 1.0
Unit
V
V/µs
µV/°C
1/ V_S = ±15 V, R_S = 10 kΩ, R_L = 2 kΩ, unless otherwise specified.
3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535
listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of
compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see
6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of
supply for this drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-
PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.
3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for
device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.
3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime-VA of change of
product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing.
3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritime 's
agent, and the acquiring activity retain the option to review the manufacturer's facility and applicable required documentation.
Offshore documentation shall be made available onshore at the option of the reviewer.
3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in
microcircuit group number 49 (see MIL-PRF-38535, appendix A).
STANDARD
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
G
5962-88630
SHEET
8