5962-8863003VKA Datasheet, PDF (11/13 Pages) List of Unclassifed Manufacturers – MICROCIRCUIT, LINEAR, INSTRUMENTATION AMPLIFIER, MONOLITHIC SILICON

TABLE IIA. Electrical test requirements.
Test requirements
Interim electrical
parameters (see 4.2)
Final electrical
parameters (see 4.2)
Group A test
requirements (see 4.4)
Group C end-point electrical
parameters (see 4.4)
Group D end-point electrical
parameters (see 4.4)
Group E end-point electrical
parameters (see 4.4)
Subgroups
(in accordance with
MIL-STD-883,
method 5005, table I)
Device
class M
1
Subgroups
(in accordance with
MIL-PRF-38535, table III)
Device
class Q
1
Device
class V
1
1, 2, 3, 4, 5, 1/
6, 8
1, 2, 3, 4, 5, 6, 8
1
1, 2, 3, 4, 1/
5, 6, 8
1, 2, 3, 4, 5,
6, 8
1
1, 2, 3, 1/ 2/
4, 5, 6, 8
1, 2, 3, 4, 5,
6, 8
1 2/
1
1
1
---
---
---
1/ PDA applies to subgroup 1.
2/ Delta limits in accordance with table IIB shall be computed with reference to the previous
interim electrical parameters.
Table IIB. 240 hour burn-in and group C end-point electrical parameters.
Parameter
V_IOS
V_OOS
I_B+
I_B-
Device type
01
03
01
03
01, 03
01, 03
Limit
Min
Max
50 µV
100 µV
3 mV
10 mV
4 nA
4 nA
Delta
Min
Max
40 µV
40 µV
6 mV
10 mV
3 nA
3 nA
4.4.2 Group C inspection. The group C inspection end-point electrical parameters shall be as specified in table IIA herein.
4.4.2.1 Additional criteria for device class M. Steady-state life test conditions, method 1005 of MIL-STD-883:
a. Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify
the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method
1005 of MIL-STD-883.
b. TA = +125°C, minimum.
c. Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.
STANDARD
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
G
5962-88630
SHEET
11