TC164 Datasheet, PDF (7/7 Pages) List of Unclassifed Manufacturers – CHIP RESISTORS ARRAY

7
Chip Resistor Surface Mount ^{TC SERIES 164}
7
75
temperature
[°C]
50
25
0
initial drying
24 hours
initial measurements
as specified in 2.2
temperature
tolerance
±2 °C (±3.6 °F)
unless otherwise
specified
90 − 98% RH
80 − 98%
RH
90 − 98% RH
80 − 98%
RH
rate of change of temperature is unspecified,
however, specimens shall not be subjected to
radiant heating from chamber conditioning processes
+10 °C (+18 °F)
−2 °C (−3.6 °F)
circulation of conditioning air shall be at a
minimum cubic rate per minute equivalent to
10 times the volume of the chamber
voltage applied as specified in 2.4
90 − 98% RH
end of final cycle;
measurements
as specified in 2.7
optional sub-cycle if specified
(2.3); sub-cycle performed during
any 5 of the first 9 cycles; humidity
uncontrolled during sub-cycle
HBK073
prior to first
cycle only
STEP1 STEP2 STEP3 STEP4 STEP5 STEP6
one cycle 24 hours; repeat as specified in 2.5
0
5
10
15
STEP7
20
25
time [h]
Fig. 9 Conditions by change of temperature
Mar. 24, 2004 V.4
www.yageo.com