SMI30 Datasheet, PDF (6/6 Pages) List of Unclassifed Manufacturers – Intrinsically Safe Sensors

Mounting Brackets
Accessory mounting bracket model
SMB30MM (27162) has curved mount-
ing slots for versatility in mounting and
orientation. The sensor mounts to the
bracket using the two jam nuts pro-
vided. Bracket material is 11-gauge zinc-
plated steel. Curved mounting slots have
clearance for 1/4" screws.
SMB30MM Mounting Bracket (27162)
The model SMB30S swivel-mount
bracket (33204, right) offers the ulti-
mate in mounting versatility for SMI30s
and other sensors with M30 x 1,5 threads.
The SMI30 threads into the adjustable
captive ball of the bracket, which is then
held firmly in place when two locking bolts are tightened. Bracket material is black PBT. Stainless
steel mounting hardware is included.
Split Clamp Bracket model SMB30C (32636, right) is similar to the SMB30S, but without the
adjustable captive swivel ball. It grips an M30x1,5 threaded sensor by its threaded barrel (S30 EZ-
BEAM sensor shown). Bracket material is black PBT. Stainless steel mounting hardware is
included.
SMB30S Swivel Bracket
(33204)
SMB30C Split Clamp
(32636)
Special Conditions for Safe Use
Parts of the enclosure are non-conducting and may generate an ignition-capable level of ESD.
Cleaning of the equipment shall be done only with a damp cloth.
WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper use of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Banner Engineering Corp. 9714 Tenth Ave. No. Minneapolis, MN 55441 Telephone: [phone] FAX (applications): [phone]