MDT2060 Datasheet, PDF (5/12 Pages) List of Unclassifed Manufacturers – 8-bit micro-controller uses a fully static CMOS design technology

MDT2060
Bit
Symbol
Function
Prescaler assignment bit :
3
PSC
0 RTCC
1 Watchdog Timer
RTCC signal Edge :
4
TCE
0 Increment on low-to-high transition on RTCC pin
1 Increment on high-to-low transition on RTCC pin
RTCC signal set :
5
TCS
0 Internal instruction cycle clock
1 Transition on RTCC pin
Interrupt edge select
6
IES
0 Interrupt on falling edge on PB0
1 Interrupt on rising edge on PB0
PORTB pull-hi
7
PBPH 0 PORTB pull-hi are enable
1 PORTB pull-hi are disable
(11) CPIO A (Control Port I/O Mode Register) : R85
“0”, I/O pin in output mode;
“1”, I/O pin in input mode.
(12) CPIO B (Control Port I/O Mode Register) : R86
“0”, I/O pin in output mode;
“1”, I/O pin in input mode.
(13) PSTA : R87
Bit Symbol
0 PRDB
1 PORB
Function
0:Power range-detector Reset occurred
1:No Power range-detector Reset Occurred
0:Power on Reset occurred
1:No Power on Reset occurred
(14) Configurable options for EPROM (Set by writer) :
Oscillator Type
RC Oscillator
HFXT Oscillator
XTAL Oscillator
LFXT Oscillator
Watchdog Timer control
Watchdog timer disable all the time
Watchdog timer enable all the time
This specification are subject to be changed without notice. Any latest information
please preview http;//www.mdtic.com.tw
P. 5
2004/1 Ver. 1.6