HY514400B Datasheet, PDF (5/8 Pages) List of Unclassifed Manufacturers – 1Mx4, Fast Page mode

HY514400B
DC CHARACTERISTICS
(TA = 0°C to 70°C , VCC = 5V ± 10%, VSS = 0V, unless otherwise noted.)
Symbol
Parameter
Test condition
ICC1
Operating Current
/RAS, /CAS Cycling
tRC = tRC(min)
ICC2
TTL Standby
Current
/RAS, /CAS ≥ VIH(min)
Other inputs ≥ VSS
ICC3
/RAS-only Refresh
Current
/RAS Cycling,/CAS = VIH
tRC = tRC(min)
ICC4
Fast Page mode Current
/CAS Cycling, /RAS = VIL
tHPC = tHPC(min)
ICC5
CMOS Standby
Current
/RAS = /CAS ≥ VCC - 0.2V
ICC6
/CAS-before-/RAS
Refresh Current
/RAS & /CAS = 0.2V
tRC = tRC(min.)
ICC7
Battery Back-up
Current (SL-part)
tRC=125µs
/CAS = CBR cycling or 0.2V
/OE & /WE = VCC - 0.2V
Address = Vcc-0.2V or 0.2V
DQ0~DQ3 = Vcc-0.2, 0.2V or Open
ICC8
Self Refresh Current
/RAS & /CAS = 0.2V
(SL-part)
Other pins are same as ICC7
Speed
50
60
70
Max.
Unit
100
90
mA
80
2
mA
50
100
60
90
mA
70
80
50
70
60
60
mA
70
50
1
mA
SL-part
200
µA
50
100
60
90
mA
70
80
300
µA
200
µA
Note
1. ICC1, ICC3, ICC4 and ICC6 depend on output loading and cycle rates(tRC and tPC).
2. Specified values are obtained with output unloaded.
3. ICC is specified as an average current. In ICC1, ICC3, ICC6, address can be changed only once while /RAS=VIL. In ICC4,
address can be changed maximum once while /CAS=VIH within one cycle time tPC.
4. Only tRAS(max) = 1µs is applied to refresh of battery backup but tRAS(max) = 10µs is to applied to normal functional
operation.
5. Icc5(max.), Icc7 and Icc8 are applied to SL-part only.
1Mx4,FP DRAM
Rev.10 / Jan.97
5