GM78L00 Datasheet, PDF (5/7 Pages) List of Unclassifed Manufacturers – 100 mA POSITIVE VOLTAGE REGULATORS

PRELIMINARY
GM78L00
100 mA POSITIVE VOLTAGE REGULATORS
ELECTRICAL CHARACTERISTICS GM78L15
T_A = 0°C to 125º C, V_I=23V, I_O=40mA, C_I=0.33µF, C_O=0.1µF, unless otherwise specified (Note 1)
CHARACTERISTICS
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Output Voltage
Line Regulation
Load Regulation
Output Voltage
(Note 2)
Quiscent Current
Quiscent Current Change
Noise
Ripple Rejection
Dropout Voltage
V_O
T_J=25°C
14.4
15.0
15.6
V
V_{R LINE}
T_J=25°C, 17.5V ≤ V_I ≤ 30V
T_J=25°C, 20V ≤ V_I ≤ 30V
65
300
mV
58
250
V_{R LOAD}
T_J=25°C, 1mA ≤ I _O ≤ 100mA
T_J=25°C, 1mA ≤ I _O ≤ 40mA
25
150
mV
15
75
V_O
17.5V ≤ V_I ≤ 30V, 1mA ≤ I _O ≤ 40mA 14.25
15
15.75
V
17.5V ≤ V_I ≤ V_MAX, 1mA ≤ I _O ≤ 70mA 14.25
15
15.75
I_Q
T_J=25°C
4.7
6.5
mA
∆I_Q
(with Line)
(with Load)
20V ≤ V_I ≤ 30V
1mA ≤ I _O ≤ 40mA
1.5
mA
0.1
N_O
T_A=25°C, 10Hz ≤ f ≤ 100kHz
82
µV
∆V_I /∆V_O T_J=25°C, f=120kHz,18.5V ≤ V_I ≤ 28.5V 34
39
dB
V_DO
T_J=25°C
1.7
V
Note 1: The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length
of the package. The data above represent pulse test conditions with junction temperatures as indicated at the initiation of tests.
Note 2: Power Dissipation ≤ 0.75W.
ELECTRICAL CHARACTERISTICS GM78L18
T_A = 0°C to 125º C, V_I=26V, I_O=40mA, C_I=0.33µF, C_O=0.1µF, unless otherwise specified (Note 1)
CHARACTERISTICS
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Output Voltage
Line Regulation
Load Regulation
Output Voltage
(Note 2)
Quiscent Current
Quiscent Current Change
Noise
Ripple Rejection
Dropout Voltage
V_O
T_J=25°C
17.3
18.0
18.7
V
V_{R LINE}
T_J=25°C, 20.5V ≤ V_I ≤ 33V
T_J=25°C, 22V ≤ V_I ≤ 33V
70
360
mV
64
300
V_{R LOAD}
T_J=25°C, 1mA ≤ I _O ≤ 100mA
T_J=25°C, 1mA ≤ I _O ≤ 40mA
27
180
mV
19
90
V_O
20.5V ≤ V_I ≤ 30V, 1mA ≤ I _O ≤ 40mA
17.1
18
18.9
V
20.5V ≤ V_I ≤ V_MAX, 1mA ≤ I _O ≤ 70mA
17.1
18
18.9
I_Q
T_J=25°C
4.7
6.5
mA
∆I_Q
(with Line)
(with Load)
22V ≤ V_I ≤ 33V
1mA ≤ I _O ≤ 40mA
1.5
mA
0.1
N_O
T_A=25°C, 10Hz ≤ f ≤ 100kHz
89
µV
∆V_I /∆V_O
T_J=25°C, f=120kHz,,21.5V ≤ V_I ≤ 31.5V
32
36
dB
V_DO
T_J=25°C
1.7
V
Note 1: The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length
of the package. The data above represent pulse test conditions with junction temperatures as indicated at the initiation of tests.
Note 2: Power Dissipation ≤ 0.75W.
Revision 1, May 2002
www.gammamicro.com