GM78L00 Datasheet, PDF (4/7 Pages) List of Unclassifed Manufacturers – 100 mA POSITIVE VOLTAGE REGULATORS

PRELIMINARY
GM78L00
100 mA POSITIVE VOLTAGE REGULATORS
ELECTRICAL CHARACTERISTICS GM78L10
T_A = 0°C to 125º C, V_I=17V, I_O=40mA, C_I=0.33µF, C_O=0.1µF, unless otherwise specified (Note 1)
CHARACTERISTICS
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Output Voltage
Line Regulation
Load Regulation
Output Voltage
(Note 2)
Quiscent Current
Quiscent Current Change
Noise
Ripple Rejection
Dropout Voltage
V_O
T_J=25°C
9.6
10
10.4
V
V_{R LINE}
T_J=25°C, 13V ≤ V_I ≤ 24V
T_J=25°C, 14V ≤ V_I ≤ 24V
51
175
mV
42
125
V_{R LOAD}
T_J=25°C, 1mA ≤ I _O ≤ 100mA
T_J=25°C, 1mA ≤ I _O ≤ 40mA
22
100
mV
13
50
V_O
13V ≤ V_I ≤ 24V, 1mA ≤ I _O ≤ 40mA
9.5
13V ≤ V_I ≤ V_MAX, 1mA ≤ I _O ≤ 70mA
9.5
10
10.5
10
10.5
V
I_Q
T_J=25°C
4.3
6.5
mA
∆I_Q
(with Line)
(with Load)
14V ≤ V_I ≤ 24V
1mA ≤ I _O ≤ 40mA
1.5
mA
0.1
N_O
T_A=25°C, 10Hz ≤ f ≤ 100kHz
62
µV
∆V_I /∆V_O
T_J=25°C, f=120kHz, 16V ≤ V_I ≤ 27V
37
44
dB
V_DO
T_J=25°C
1.7
V
Note 1: The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length
of the package. The data above represent pulse test conditions with junction temperatures as indicated at the initiation of tests.
Note 2: Power Dissipation ≤ 0.75W.
ELECTRICAL CHARACTERISTICS GM78L12
T_A = 0°C to 125º C, V_I=19V, I_O=40mA, C_I=0.33µF, C_O=0.1µF, unless otherwise specified (Note 1)
CHARACTERISTICS
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Output Voltage
Line Regulation
Load Regulation
Output Voltage
(Note 2)
Quiscent Current
Quiscent Current Change
Noise
Ripple Rejection
Dropout Voltage
V_O
T_J=25°C
11.5
12.0
12.5
V
V_{R LINE}
T_J=25°C, 14.5V ≤ V_I ≤ 27V
T_J=25°C, 16V ≤ V_I ≤ 27V
55
250
mV
49
200
V_{R LOAD}
T_J=25°C, 1mA ≤ I _O ≤ 100mA
T_J=25°C, 1mA ≤ I _O ≤ 40mA
22
100
mV
13
50
V_O
14.5V ≤ V_I ≤ 27V, 1mA ≤ I _O ≤ 40mA 11.4
14.5V ≤ V_I ≤ V_MAX, 1mA ≤ I _O ≤ 70mA 11.4
12
12
12.6
12.6
V
I_Q
T_J=25°C
4.3
6.5
mA
∆I_Q
(with Line)
(with Load)
16V ≤ V_I ≤ 27V
1mA ≤ I _O ≤ 40mA
1.5
mA
0.1
N_O
T_A=25°C, 10Hz ≤ f ≤ 100kHz
70
µV
∆V_I /∆V_O
T_J=25°C, f=120kHz, 15V ≤ V_I ≤ 25V
37
42
dB
V_DO
T_J=25°C
1.7
V
Note 1: The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length
of the package. The data above represent pulse test conditions with junction temperatures as indicated at the initiation of tests.
Note 2: Power Dissipation ≤ 0.75W.
Revision 1, May 2002
4
www.gammamicro.com