PAK-I Datasheet, PDF (4/28 Pages) List of Unclassifed Manufacturers – 310 Ivy Glen Court

includes a 10MHz ceramic resonator that you can
use to clock the chip.
Other than the power and clock connections, the
Pak I requires at least two wires to connect
between your microcontroller (the host) and itself.
Depending on the host's capabilities and your
application, you may want to use more pins for I/O
(up to 5 pins).
If You Need Help
If you require assistance with your PAK-I, please
feel free to contact us. The best way to get support
is via e-mail ([e-mail]). However,
you may also call between 9AM - 4PM Central
Time at [phone]. You can also fax to (281)
538-2147. Be sure to check out our Web page for
updates at www.al-williams.com/awce.htm.
Registering Your PAK-I
Please take a moment to register your e-mail
address with AWC. Simply send an e-mail
message to [e-mail]. AWC will
not make your address available to other
companies, but we may periodically send you
updated technical notes. You’ll also receive
information about new microcontroller products
and specials.