G408-0001 Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – DC Input Field Configurable Isolator

SPECIFICATIONS
Input
Voltage
Range Limits: 10mV to 100V
Impedance: >100K Ohms
Overvoltage:
400 Vrms, max.(Intermittent);
264 Vrms,max. (Continous)
Current
Range Limits: 1mA to 100mA
Impedance: 20 Ohms, typical
Overcurrent: 170mA RMS, max.
Overvoltage: 60VDC
Zero Turn-Up: 50% of full scale input
Span Turn-Down: 50% of full scale input
Common Mode (Input to Ground) 1800 VDC, max.
Output (G408-0001)
Voltage
Output: 0-5V, 0-10V
Source Impedance: <10 Ohms
Drive: 10mA, max.
Current
Output: 0-1mA,4-20mA,0-20mA
Source Impedance: >100K Ohms
Compliance:
0-1mA: 7.5V, max (7.5K Ohms)
4-20mA: 12V, max (600 Ohms)
0-20mA: 12V, max (600 Ohms)
Output (G408-1001)
Voltage
Output: -5V to +5V, -10 to +10V
Source Impedance: <10 Ohms
Drive: 10mA, max.
LED Indication (green)
Input Range
>110%(approx) input:8Hz flash
< -10%(approx) input: 4Hz flash
Accuracy (Including Linearity, Hysteresis)
<2mA/<20mV:± 0.35% of full scale, typical;
0.5%,max.
>2mA/>20mV:± 0.1% of full scale, typical; 0.2%, max.
Response Time (10-90%)
200mSec., typical
Stability (Temperature)
±0.025% of full scale/°C,typical; ±0.05%/°C, max.
Common Mode Rejection
DC to 60Hz: 100dB
Isolation (Input to Output)
1800VDC between input, output and power
EMC Compliance (CE Mark)
Emissions: EN50081-1
Immunity: EN50082-2
Safety: EN50178
Mean Time Between Failures
60K Hours
Humidity (Non-Condensing)
Operating: 15 to 95% @ 45°C
Soak: 90% for 24 hours @ 65°C
Temperature Range
Operating: 0 to 55°C (32 to 131°F)
Storage: -25 to 70°C (-13 to 158°F)
Wire Terminals
Screw terminals for 12-22AWG
Power
Consumption: 1.5W typical, 2.5W max.
Range: 9 to 30VDC
Weight
0.5 lbs.
Agency Approvals
CSA certified per standard C22.2, No. 0-M91 and
142-M1987 (File No. LR42272).
UL recognized per standard UL508
(File No.E99775).
CE Conformance per EMC directive 89/336/EEC
and Low Voltage 73/23/EEC (Input < 75VDC,
only).
Models & Accessories
Ordering Information
Specify:
1. Model: G408-0001 (standard outputs) or
G408-1001 (bipolar outputs)
2. Accessories: (see Accessories)
3. Optional Custom Factory Calibration; specify
C620 with desired input and output range.
Accessories
All SlimPak "G" series modules will mount on
standard TS32 (model MD02) or TS35 (model MD03)
DIN rail and include model HS01 heat sink. In addition,
the following accessories are available:
MD03 TS35x7.5 DIN rail
WV905 24VDCPower Supply (0.5 Amp)
H910 24VDC Power Supply (1 Amp)
H915 24VDC Power Supply (2.3 Amp)
MB03 End Bracket for MD03
C664 I/O Descriptive Tags
C006 0.1 Ohm, 5W, 1% shunt resistor
Dimensions
Eurotherm Controls
741-F Miller Drive
Leesburg, VA 20175-8993
703-443-0000
[e-mail]
actionio.com
Action Instruments
Barber-Colman
Factory Assistance
For additional information on calibration, operation and
installation contact our Technical Services Group:
703-669-1318
[e-mail]
721-0657-00-F 09/04 Copyright© Eurotherm, Inc 2004
Eurotherm Chessell
Eurotherm Controls