G408-0001 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – DC Input Field Configurable Isolator

ULTRA
SLIMPAK^®
G408-0001 &
G408-1001
DC Input Field
Configurable Isolator
Provides a Fully Isolated DC Output
in Proportion to a DC Input
Benefits
Eliminates Ground Loops
Field Configurable Input
Ranges: 10mV to 100V,
1mA to 100mA
Field Configurable Output
Ranges: 0-5V, 0-10V,
0-1mA, 0-20mA, 4-20mA,
±5v, ±10V
Ultra Slim Housing for High
Density Installations
Flexible Power Supply
Accepts 9 to 30VDC
ASIC Technology
Description
The Ultra SlimPak G408 is a DIN rail mount, DC input signal conditioner with 1800VDC isolation
between input, output and power. The field configurable input and output offers flexible, wide
ranging capability for DC current and voltage signals.
The input can be configured for any one of 12 voltage ranges from 10mV to 100V or 6 current ranges
from 1mA to 100mA (see Table 1). The output is linear to the input and can be set for either 0-5V,
0-10V, 0-1mA, 0-20mA or 4-20mA (for models G408-0001) and -5 to +5V or -10 to +10V (for model
G408-1001).
Wide ranging, precision zero and span pots allow 50% adjustability of offset and span turn-down
within each of the 18 switch selectable ranges. For example, the 0-2mA input range could be turned
down to 0-1mA and provide a full scale output signal (e.g. 4-20mA), or turned down and offset to
achieve a 1-2mA/4-20mA I/O combination.
The G408 also accepts bipolar inputs (e.g. 10V range set to bipolar = -10 to +10V) and offers selectable
normal or reverse operation (e.g. 4-20mA/20-4mA). The ASIC based I/O channel is optically isolated
to 1800VDC and is transformer isolated from the power supply.
Application
The G408 is useful in eliminating ground loops, converting signal levels, and providing signal drive.
The field configurable, wide ranging capability ensures maximum flexibility for most DC to DC
applications, minimizing spare part requirements.
Diagnostic LED
The G408 is equipped with a dual function LED signal monitor. The green, front mounted LED indicates
both DC power and input signal status. Active DC power is indicated by an illuminated LED. If the
input signal is more than 110% of the full scale range, the LED will flash at 8Hz. Below -10%, the flash
rate is 4Hz.