GPS140 Datasheet, PDF (33/38 Pages) List of Unclassifed Manufacturers – GPS Positioning Module

Chapter 6 - GPS140HR SPECIFICAT IONS
Host interface
16-bit PC/104 bus, XT-bus used
GPS Receiver specifications
Operational
GPS receiver
Update rate
Reacquisition
RTCM SC-104 differential compatibility
Serial data output protocols
Power requirement
Connexant Jupiter TU-D140
Once per second
2s typical with a 10s blockage
Direct connection to RS232 input
NMEA-0183, Connexant binary
+5V, preamplifier passthrough
up to +12V for active antenna
RF Signal environment
RF input
Connector
Burnout protection
1575.42MHz (L1 band) at levels
-130dBW and –163dBW
OSX high retention female conn.
-10dBW signal with a bandwidth of
10MHz centered about the L1
carrier frequency.
Environmental
Cooling
Operating temperature
Humidity
Altitude
Maximum Vehicle Dynamic
Vibration
Convection
-40 to +85C
RH up to 95% non condensing
-1000 to 60.000 ft
500m/s acquisition and navigation
Survival 18G peak
UART
UART compatibility
Oscillator frequency
Connection
Base addresses
Interrupts
16C550
1.8432MHz
Null Modem
32
2,3,4,5,7,10,11,12,14 and 15
GPS140HR
33
RTD Embedded Technologies, Inc.