GPS140 Datasheet, PDF (12/38 Pages) List of Unclassifed Manufacturers – GPS Positioning Module

Factory-Configured Jumper Settings
Table 2-1 below illustrates the factory jumper setting for the GPS140HR. Figure 2-1 shows
the board layout of the GPS140HR and the locations of the jumpers. The following
paragraphs explain how to change the factory jumper settings to suit your specific
application.
Table 2-1 Factory configured jumper settings (Please see figure 2-1 below for more
detailed locations)
JUMPER NAME
BASE
IRQ
CONF
X1
DESCRIPTION
Base Address
Host interrupt
GPS configuration
Antenna supply
NUMBER OF JUMPERS
6
11+1
3
3
FACTORY SETTING
2E8
5, G – jumper closed
NMEA output
5V antenna cable
Fig. 2-1 GPS140HR Board layout showing jumper locations
GPS140HR
12
RTD Embedded Technologies, Inc.