D4DL Datasheet, PDF (3/16 Pages) List of Unclassifed Manufacturers – Compact Guard-locking Interlock Safety Door Switch

D4DL
D4DL
Specifications
Approved Standard Ratings
TÜV (EN60947-5-1)
Item
Utilization category
Rated operating current (I_e)
Rated operating voltage (U_e)
LED type
AC-15
6A
115 V
Neon lamp
type
AC-15
3A
250 V
Note: Use a 10-A fuse type gI or gG as a short-circuit protection device that conforms to IEC269.
UL/CSA (UL508, CSA C22.2 No. 14)
A300
Rated voltage
120 VAC
240 VAC
Carry current
10A
Current (A)
Make
Break
60
6
30
3
Make
7,200
Voltage
720
Break
Characteristics
Degree of protection (see note 2)
IP65 (EN60947-5-1)
Life expectancy (see note 3)
Mechanical:1,000,000 times min.
Electrical: 500,000 times min.
Operating speed
0.05 to 0.5 m/s
Operating frequency
30 operations/minute max.
Rated frequency
50/60 Hz
Positive opening force (see note 4)
58.84 N {6 kgf} min. (EN60947-5-1)
Positive opening travel (see note 4)
10 mm min. (EN60947-5-1)
Holding force
500 N {51 kgf} min. (GS-ET-19)
Insulation resistance
100 MΩ min. (at 500 VDC)
Rated insulation voltage (U_i)
Conventional enclosed thermal current
(I_the)
Rated impulse voltage (U_imp)
300 V (EN60947-5-1)
10 A (EN60947-5-1)
Between terminals of same or different polarity, each terminal and ground, and each
terminal and non-current-carrying metal part: 4 kV
Between the solenoid and non-current-carrying metal part: 0.8 kV for 24 VDC solenoid,
2.5 kV for 110 VAC solenoid, and 4 kV for 230 VAC solenoid (EN60947-5-1)
Conditional short-circuit current
100 A (EN60947-5-1)
Pollution degree (operating environment) 3 (EN60947-5-1)
Protection against electric shock
Class II (double insulation)
Switching overvoltage
1,500 V max. (EN60947-5-1)
Contact resistance
25 mΩ max. (initial value)
Vibration resistance
Shock resistance
Malfunction:10 to 55 Hz, 0.75-mm single amplitude
Mechanical:1,000 m/s² (100G) min.
Malfunction:300 m/s² (30G) min.
Ambient temperature
Operating: –10°C to 55°C with no icing
Ambient humidity
Operating: 95% max.
Weight
Approx. 340 g (D4DL-1CFA-B)
Material
Body and actuator flange Glass-fiber reinforced thermoplast, self-extinguishing
Actuator
Stainless steel
Note: 1. The above values are initial values.
2. Although the switch box is protected from dust or water penetration, do not use the D4DL in places where foreign material may
penetrate through the key hole on the head, otherwise switch damage or malfunctioning may occur.
3. The above mechanical or electrical life is ensured at an ambient temperature of 5°C to 35°C and an ambient humidity of 40% to 70%.
4. These values must be satisfied to ensure safe operation.
3