5962R0051701VCA Datasheet, PDF (3/12 Pages) List of Unclassifed Manufacturers – MICROCIRCUIT, LINEAR, QUAD, RAIL-TO-RAIL, PRECISION, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

1.3 Absolute maximum ratings. 1/
Supply voltage ............................................................................................. ±18 V
Power dissipation ........................................................................................ 500 mW
Differential input voltage .............................................................................. ±0.6 V
Input voltage ................................................................................................ ±18 V
Output short-circuit duration ........................................................................ Indefinite
Storage temperature range ......................................................................... -65°C to +150°C
Lead temperature (soldering, 60 seconds) .................................................. +300°C
Junction temperature (T_J) ........................................................................... -65°C to +150°C
Thermal resistance, junction-to-case (θ_JC) ................................................. See MIL-STD-1835
Thermal resistance, junction-to-ambient (θ_JA):
Case C ..................................................................................................... 108°C/W
Case D ..................................................................................................... 160°C/W
1.4 Recommended operating conditions.
Supply voltage (V_S) ..................................................................................... -15 V to +15 V
Operating temperature range (T_A) .............................................................. -55°C to +125°C
1.5 Radiation features:
Maximum total dose available (dose rate = 50 – 300 rads(Si)/s):
Device type 01 ......................................................................................... 100 krads(Si) 2/
Maximum total dose available (dose rate ≤ 10 mrads(Si)/s):
Device type 02 ......................................................................................... 50 krads(Si) 3/
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at http://quicksearch.dla.mil or from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
_____
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ Device type 01 may be dose rate sensitive in space environment and may demonstrate enhanced low dose rate effects.
Radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-STD-883,
method 1019, condition A.
3/ For device type 02, radiation end point limits for the noted parameters are guaranteed for the conditions specified in
MIL-STD-883, method 1019, condition D.
STANDARD
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
G
5962-00517
SHEET
3