5962R0051701VCA Datasheet, PDF (10/12 Pages) List of Unclassifed Manufacturers – MICROCIRCUIT, LINEAR, QUAD, RAIL-TO-RAIL, PRECISION, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

TABLE IIA. Electrical test requirements.
Test requirements
Interim electrical
parameters (see 4.2)
Final electrical
parameters (see 4.2)
Group A test
requirements (see 4.4)
Group C end-point electrical
parameters (see 4.4)
Group D end-point electrical
parameters (see 4.4)
Group E end-point electrical
parameters (see 4.4)
Subgroups
(in accordance with
MIL-PRF-38535, table III)
Device
Device
class Q
1
class V
1
1,2,3,4,5,6, 1/
7,8
1,2,3,4,5,6,
7,8
1
1,2,3,4, 1/ 2/
5,6,7,8
1,2,3,4,5,6,
7,8
1 2/
1
1
1,4
1,4
1/ PDA applies to subgroup 1. V_OS excluded from PDA.
2/ Delta limits as specified in table IIB shall be required where specified,
and delta limits shall be computed with reference to the previous
endpoint electrical parameters.
TABLE IIB. 240 hour burn-in and group C end-point electrical parameters. T_A = 25°C
Parameter
V_OS
I_IB
I_OS
Device type
01, 02
Limit
±250 µV
350 nA
50 nA
Delta 1/
±250 µV
100 nA
40 nA
1/ Delta limits apply to ±15 V operation.
4.4.4 Group E inspection. Group E inspection is required only for parts intended to be marked as radiation hardness assured
(see 3.5 herein).
a. End-point electrical parameters shall be as specified in table IIA herein.
b. For device classes Q and V, the devices or test vehicle shall be subjected to radiation hardness assured tests as
specified in MIL-PRF-38535 for the RHA level being tested. All device classes must meet the postirradiation end-point
electrical parameter limits as defined in table I at T_A = +25°C ±5°C, after exposure, to the subgroups specified in
table IIA herein.
4.4.4.1 Total dose irradiation testing. Total dose irradiation testing shall be performed in accordance with MIL-STD-883
method 1019, condition A for device type 01 and condition D for device type 02, and as specified herein.
STANDARD
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
G
5962-00517
SHEET
10