AV090003A940N Datasheet, PDF (20/31 Pages) List of Unclassifed Manufacturers – Anti-vandal and security pushbutton switches

AV series
Snap-action security pushbuttons Ø 22 mm (.866) with overmolded actuator
Illuminated and non-illuminated - momentary (NO)
NO
(function 3)
ORDER FORMAT
AV
3
D
SERIES
Bush./act.
configuration
Illumination
S0 No
SL Illum.
Contacts
Terminals
2 Solder
9 Screw
OPTIONS
See next
page
SPECIFICATIONS
• Travel : 0,7 mm (.027) ± 0,1 mm (.003)
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA
Other colours : 2V (3V max.) 10mA
(a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N ±2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Hand soldering : 270°C, 3 sec. max.
• Packaging unit : 16 pieces
** Resistor value = ^{supply voltage - LED forward voltage}
LED forward current
MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
B2
• Bushing : see next page
• Actuator : stainless steel, with
thermoplastic overmolding
• LED
CUT-OUT
• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
To order a product, select a basic
model below and add the desired
options selected on next page.
Flat actuator - solder lug terminals
2.00
(.078)
Illuminated
AV3SLD2
Non-illuminated
AV3S0D2
Hex nut 25 (.984) across flats
2.00
(.078)
4.00
(.157)
1.90
(.074)
9.30
(.366)
EPOXY
4.15
(.163)
4.80
(.188)
Flat actuator - screw terminals
2.00
(.078)
Illuminated
AV3SLD9
Non-illuminated
AV3S0D9
Hex nut 25 (.984) across flats
2.00
(.078)
4.00
(.157)
9.00
(.354)
9.30
(.366)
4.80
(.188)
APEM
www.apem.com
B2-95