AV090003A940N Datasheet, PDF (11/31 Pages) List of Unclassifed Manufacturers – Anti-vandal and security pushbutton switches

AV series
Security pushbutton switches Ø 19 mm (.748)
Momentary (NC/NO)
31
24
Combined NC/NO
ORDER FORMAT
Series
AV
Bushing
diameter
19
Bush./act.
config.
L
Actuator
style
P
B
Bush./act. Contact/
matl terminals
40
7
See below
SPECIFICATIONS
• Max. current/voltage rating with resistive load :
B2
5A 250VAC - 5A 125VAC - 6.000 cycles
5A 15VDC - 3A 30VDC - 50.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between term. and frame
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -20°C to +85°C
• Low level or mechanical life : 1.000.000 cycles
• Front panel sealing : IP65 and IP69K
• Packaging unit : 20 pieces
MATERIALS
• Case : PA 6/6
• Contacts : silver
• Bushing : stainless steel (std)
• Actuator : stainless steel (std)
CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting :
30 mm x 30 mm (1.181x1.181)
All model numbers below are for switches with standard bushing/actuator material.
BASIC MODEL
Solder lug terminals - AV19..407
Flat actuator
AV19LP407
Curved actuator
AV19LB407
➞ ^O-ring
3.60
(.141)
2.00
(.078)
Hex nut 22 (.866) across flats
Ø19.00X1.00 SI
(.748DIAX1.00 IS)
2.00
(.078)
13.10
(.515)
12.60
(.496)
3.60
(.141)
BUSHING/ACTUATOR MATERIALS
CODE
00
20
BUSHING
Nickel plated brass
Chrome plated brass
For non-standard material, replace 40 with one of the following codes.
ACTUATOR
Nickel plated brass
Chrome plated brass
B2-86
www.apem.com
APEM