MAX1037EKA Datasheet, PDF (2/8 Pages) List of Unclassifed Manufacturers – PLASTIC ENCAPSULATED DEVICES

Conclusion
The MAX1037 successfully meets the quality and reliability standards required of all Maxim products. In addition,
Maxim’s continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality
and reliability standards.
Table of Contents
I. ........Device Description
II. ........Manufacturing Information
III. .......Packaging Information
IV. .......Die Information
V. ........Quality Assurance Information
VI. .......Reliability Evaluation
......Attachments
I. Device Description
A. General
The MAX1037 low-power, 8-bit, multichannel, analog-to-digital converter (ADCs) features internal track/hold (T/H),
voltage reference, clock, and an I²C-compatible 2-wire serial interface. This device operates from a single supply and
requires only 350µA at the maximum sampling rate of 188ksps. Auto-Shutdown™ powers down the device between
conversions reducing supply current to less than 1µA at low throughput rates. The MAX1037 has four analog input
channels. The analog inputs are software configurable for unipolar or bipolar and single-ended or pseudo-differential
operation.
The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage
ranging from 1V to V_DD. The MAX1037 features a 2.048V internal.
The MAX1037 is available in a 8-pin SOT23 package.
B. Absolute Maximum Ratings
Item
VDD to GND
AIN0–AIN11, REF to GND
SDA, SCL to GND
Maximum Current Into Any Pin
Operating Temperature Range
Junction Temperature
Storage Temperature Range
Lead Temperature (soldering, 10s)
Continuous Power Dissipation (TA = +70°C)
8-Pin SOT23
Derates above +70°C
8-Pin SOT23
Rating
-0.3V to +6V
-0.3V to the lower of (VDD + 0.3V) and +6V
-0.3V to +6V
±50mA
-40°C to +85°C
+150°C
-60°C to +150°C
+300°C
567mW
7.1mW/°C