CHP0230-PM Datasheet, PDF (2/4 Pages) List of Unclassifed Manufacturers – 824 to 849 MHz 28.5 dBm, Cellular InGaP HBT Amplifier Module

CHP0230-PM
Product Specifications - July 2002
(2 of 4)
TM
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature with collector voltage (+Vcc) = 3.6 V.
Parameter
Condition
Min
Typ
Max
Frequency Range
824
849
Gain
@ Digital power output
29
30
33
Gain Ripple*
824-849 MHz
1.5
Gain Variation
Over supply voltage
2
Over temperature
0.03
Power Output
CDMA mode
+28.5
Analog
+31.0
Harmonics
2nd @ Po = +31.5 dBm
-30
3rd @ Po = +31.5 dBm
-30
Noise Power in Receive Band 30 kHz bandwidth
-90
Linearity (ACPR)
CDMA mode @ +28.5 dBm Pout, 885 kHz offset
CDMA mode @ +28.5 dBm Pout, 1.9 MHz offset
CDMA2K 1X mode** @ +27.8 dBm Pout, 885 kHz offset
CDMA2K 1X mode** @ +27.8 dBm Pout, 1.9 MHz offset
-52
-47
-59
-56
-49
-47
-58
-56
Noise Figure
4.0
5.0
Input Return Loss
-10
Icc (Vcc = 3.6 V)
Pout = +12.0 dBm - CDMA mode
Pout = +28.5 dBm - CDMA mode
Pout = +31.5 dBm - Analog mode
105
112
515
560
750
815
Quiescent Current (Iq)
Vref Supply Current (Iref)
Vref Supply Voltage (Vref)
Leakage Current
No RF
Fixed and regulated (1.2% tolerance)
Vref = 0 V, Vcc _{= 3.6 V}
60
2.0
5.0
2.95
10
* Specifications guaranteed over the temperature range of -20°C to +70°C. ** Modulation HPSK in 1.2288 MHz, RC3 PAR = 4.7 @ 1% CCDF.
Units
MHz
dB
dB
dB/V
dB/°C
dBm
dBm
dBc
dBc
dBm
dBc/30KHz
dBc/30KHz
dBc/30KHz
dBc/30KHz
dB
dB
mA
mA
mA
mA
mA
V
µA
– Continued from Page 1 –
Modulation When biased as specified, the CHP0230-PM will
achieve the required adjacent channel response for the digital
system specified. Celeritek tests 100% of each product under
digital modulation to ensure correlation to customer applica-
tions.
Thermal
1. The ground pad on the backside of the CHP0230-PM must
be soldered to the ground plane.
2. All leads of the package must be soldered to the appropriate
electrical connection.
3236 Scott Boulevard, Santa Clara, California 95054
Phone: [phone]
Fax: [phone]