CCSTA14N40 Datasheet, PDF (2/4 Pages) List of Unclassifed Manufacturers – N-Type, ThinPak

CCSTA14N40
N-Type, ThinPak^TM
Preliminary Data Sheet
Performance Characteristics
Parameters
T_J=25^oC unless otherwise specified
Symbol
Test Conditions
Anode to Cathode Breakdown Voltage
Anode-Cathode Off-State Current
V_DR V_GK=0, I_A=1mA
I_D
V_GK=0V, V_AK=4000V
T_J=25^oC
T_J=125^oC
Turn-On Threshold Current
V_GK(TH) V_AK=V_GK, I_AK=1mA , see Note 1
Gate-Cathode Leakage Current
Anode-Cathode On-State Voltage
Turn-on Delay Time
Pk Rate of Change of Current (measured)
Peak Anode Current
I_GK(lkg)
V_T
t_D(ON)
dI/dt
I_P
V_GK=0V, see Note 1
I_T=400A
T_J=25^oC
Ig = 500 mA
T_J=125^oC
0.75 uF Capacitor discharge
V_AK = 3.95 kV
T_J=25^oC
R_gk = 10 ohms, Ls = 90 nH
Gate di/dt =100 A/us
Measurements
Min. Typ. Max. Units
4
kV
<50 100
uA
100 800
uA
5
mA
20
uA
1.7
V
1.9
V
200
ns
30
kA/us
10
kA
Notes:
1. Measurements made with a 10 Ohm shorting resistor connected between the gate and cathode.
2. Case Exterior Assummed to be 0.002" of 63sn/37pb solder applied directly to cathode bond area of thinPak.
Typical Performance Curves (unless otherwise specified)
Figure 1.
Measured Low current
On-State Characteristics.
Figure 2.
Predicted high current
On-State Characteristics.