83C694 Datasheet, PDF (19/33 Pages) List of Unclassifed Manufacturers – TWISTED PAIR INTERFACE AND MACHESTER ENCODER/DECODER

83C694D
DC ELECTRICAL SPECIFICATIONS
4.0 DC ELECTRICAL SPECIFICATIONS
4.1 ABSOLUTE MAXIMUM RATINGS
Supply Voltage (Vcc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
TTL Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 – 5.5V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 – 5.5V
Differential Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 – 16V
Differential Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 mA
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65°C (-85°F) to 150° (302°F)
Absolute maximum ratings indicate limits beyond which permanent damage may occur. Continuous
operation at these limits is not recommended; operation should be limited to conditions specified under DC
Operating Characteristics.
4.2 RECOMMENDED OPERATING CONDITIONS
Supply Voltage (Vcc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V ±5%
Ambient Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C (32°F) to 70°C (158°F)
4.3 DC OPERATING CHARACTERISTICS
Ta = 0°C (32°F) to 70°C (158°F)
Vcc = +5V ±5%
NOTE
All currents into device pins are positive. All currents out of device pins are negative. All voltages
are referenced to ground unless otherwise specified.
SYMBOL
Vih
Vil
Iih
Iil
Vcl
Voh
CHARACTERISTIC
MIN
Input High Voltage
2.0
(TTL and X1)¹
Input High Voltage
4.5
(SEL)
Input Low Voltage
–
(TTL, X1, SEL)
Input High Current
–
(TTL, X1, SEL)
Input High Current
–
(RX± and CD± )
Input Low Current
–
(TTL, X1 and SEL)
Input Low Current
–
(RX± and CD± )
Input Clamp Voltage (TTL) –
Output High Voltage
3.5
(RXD, RXC, CRS, TXC,
COL, X2 and LEDs)²
16
MAX
–
–
UNITS
CONDITIONS
V
–
V
–
0.8
V
–
50
µA
Vin = Vcc
500
µA
-50
µA
-500
µA
Vin = 0.5V
-1.2
V
–
V
Iin = -12mA
Ioh = -100µA