4245AB51K00650 Datasheet, PDF (19/20 Pages) List of Unclassifed Manufacturers – Metallized Conductive Products

CONDUCTIVE TAPE
High-Flex^® Conductive Fabric Shielding Tape
High-Flex^® conductive fabric shielding tapes offer exceptional conformability and conductivity for dynamic flex applications. High-Flex^® tapes
are constructed of Flectron^® nickel/copper metallized ripstop with a conductive pressure sensitive adhesive (PSA). This reliable tape design
provides outstanding shielding performance while offering superior abrasion and corrosion resistance under high dynamic flex conditions.
The proprietary anti-fray coating of High-Flex^® EMI shielding tapes
virtually eliminates concerns of loose conductive fibers and their
potential to cause board level damage. Other significant advantages
over other fabric and foil shielding tapes include:
• Thinner design provides superior flexibility and durability.
• High conductivity and shielding effectiveness.
• Adhesive system provides high peel strength.
• Easy die-cutting and processing.
• Superb adhesion of nickel copper plating.
• Eliminates the potential of injury due to the sharp edges
of metal foil tapes.
High-Flex^® EMI shielding tape is available in standard roll widths
from 0.394" (10 mm) to 1.969" (50 mm) in 0.197" (5 mm) incre-
ments and roll lengths of 65.62' (20 M). Master rolls are available
in sizes up to 1.4 meter widths and 300 meter lengths. For your
unique design requirements, custom die-cut parts are also available.
130
120
110
100
90
80
70
60
50
40
30
20
10
0
200
Shielding Effectiveness
Ni/Cu Nylon RipStop (1A)
Shielding Effectiveness per MIL-STD-285 (Mod.)
3050-226
1000
Frequency (MHz)
10000 18000
Some typical applications for High-Flex^® EMI shielding tapes include:
• Shielding cables on notebook computers, copiers or other electronic equipment.
• “Fix-it” applications in test laboratories.
• Shielding over a component in which high conformability is essential.
• Shielding or grounding in weight sensitive applications.
• Shielding or grounding for electronic equipment where vibration may be present during operation.
Tape Construction
Carrier
Flectron® Nickel Copper Ripstop Fabric (1A)
Adhesive
Conductive Pressure Sensitive Acrylic Adhesive
Liner
Kraft Paper
Performance Characteristics
Conductive Tape Thickness
0.006 inches (0.15 mm)
Liner Thickness
0.005 to 0.006 inches (0.13 mm to 0.15 mm)
Tensile Strength (ASTM D5035) 50 lb / in.
Weight (LT 500)
2.3 to 3.0 oz./sq. yard
(78.0 to 118.7 grams/sq. Meter)
XY Sheet Resistivity
(ASTM F390)
< .07 ohms/sq.
Peel Strength
30 oz./in. (33 N/100 mm)
Abrasion Resistance
(ASTM D3886)
> 1,000,000 Cycles
Temperature Range
-40°F to 212°F (Min/Max) (-40°C to 100°C)
Shielding Effectiveness
> 60 dB up to 18GHz
Ordering Information:
Digits: 1 2 3 4 5 6 7 8 9 10 11
1A025 0R 020 0
Digits 1 and 2
Designate conductive tape product line and fabric
options: 1A = Nickel Copper Ripstop Fabric
Digits 3 through 6
Designate width in millimeters to one decimal place. In the
example shown above, the 0250 indicates a 25 mm wide roll).
Digit 7
Designates the form the tape is provided in:
R = Roll K = Kiss-Cut in Pieces P = Pieces
Digits 8 through 11
Designate the roll length in meters to one decimal place.
The above example 0200 indicates a roll length of 20 meters).
19
www.lairdtech.com