AU9362 Datasheet, PDF (18/26 Pages) List of Unclassifed Manufacturers – USB Multiple Slots Flash Memory Card Reader Technical Reference Manual

DC ELECTRICAL CHARACTERISTICS
Over recommended operating conditions. Voltages are referenced to GND (Ground=0V).
SYMBOL
Table 6.7 DC ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITIONS
LIMITS
-40^˚C to +85^˚C
MIN
TYP
MAX
VHYS Hysteresis on inputs
Vcc=3.0V to 3.6V (Note 3)
0.3
0.4
0.5
UNIT
V
VIH
HIGH level input
Vcc=3.0V to 3.6V (Note 3)
1.5
2.0
V
VIL
LOW level input
Vcc=3.0V to 3.6V (Note 3)
0.8
RoH
Output impedance (HIGH
state)
Note 2
28
RoL
Output impedance (LOW
state)
Note 2
28
VOH
VOL
HIGH level output
(Note 3)
LOW level output
(Note 3)
Vcc=3.0V Io=6mA
2.2
Vcc=3.0V Io=4mA
2.4
Vcc=3.0V Io=100µA
2.8
Vcc=3.0V Io=6mA
Vcc=3.0V Io=4mA
Vcc=3.0V Io=100µA
IQ
Quiescent supply current
Vcc=3.6V VI=Vcc or GND
Io=0
Isup
Supply current in suspend
Vcc=3.6V VI=Vcc or GND
Io=0
IFS
Active supply current (Full
Speed)
Vcc=3.3V
ILS
Active supply current (Low
Speed)
Vcc=3.3V
ILeak Input leakage current
Vcc=3.6V VI=5.5V or GND,
not for I/O Pins
IOFF
3-state output OFF-state
current
Vi=Vih or ViL; Vo=Vcc or
GND
1.1
V
34
43
ohm
35
43
ohm
2.7
V
0.7
0.3
0.4
V
0.2
330
600
µA
70
µA
9
14
mA
2
mA
+/-0.1 +/-0.5
µA
+/-10
µA
NOTES:
1. All typical values are at Vcc=3.3V and Tamb=25^˚C.
2. This value includes an external resistor of 24 ohm +/-1%.
diagram for testing details.
3. All signals except D+ and D-.
See "Load D+ and D-"
AU9362 USB Multiple Slots Flash Memory Card Reader V1.03
Official Release_ Public
Page 18 of 26