AU9362 Datasheet, PDF (16/26 Pages) List of Unclassifed Manufacturers – USB Multiple Slots Flash Memory Card Reader Technical Reference Manual

6.4 DC Electrical Characteristics for 5 volts operation
Table 6.4 DC Electrical Characteristics for 5 volts operation
( Under Recommended Operating Conditions and V_CC=4.5v ~ 5.5v , Tj= -40^OC to + 85^OC )
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
V_IL
Input Low Voltage
TTL
0.8
V
V_IL
Input Low Voltage
CMOS
0.3*V_CC
V
V_IL
Schmitt input Low Voltage
TTL
1.10
V
V_IL
Schmitt input Low V oltage
CMOS
1.84
V
V_IH
Input High Voltage
TTL
2.2
V
V_IH
Input Hight Voltage
CMOS
0.7*V_CC
V
V_IH
Schmitt input High Voltage
TTL
1.87
V
V_IH
Schmitt input High Voltage
CMOS
3.22
V
V_OL
Output low voltage
I_OL=2, 4, 8, 12, 16, 24 mA
0.4
V
V_OH
Output high voltage
I_OH=2, 4, 8, 12, 16, 24 mA 3.5
V
R_I
Input Pull-up/down resistance
Vil=0_V or Vih=V_CC
50
KΩ
6.5 Crystal Oscillator Circuit Setup for Characterization
The following setup was used to measure the open loop voltage gain for crystal oscillator
circuits. The feedback resistor serves to bias the circuit at its quiescent operating point
and the AC coupling capacitor, Cs, is much larger than C1 and C2.
Figure 6.1 Crystal Oscillator Circuit Setup for Characterization
AU9362 USB Multiple Slots Flash Memory Card Reader V1.03
Official Release_ Public
Page 16 of 26