AU9254_05 Datasheet, PDF (14/23 Pages) List of Unclassifed Manufacturers – USB Hub Controller

ABSOLUTE MAXIMUM RATINGS (Notes 1 and 2)
In accordance with the Absolute Maximum Rating System, Voltages are referenced to GND (Ground=0v)
SYMBOL
Table 5.7 Absolute Maximum Ratings
PARAMETER
CONDITIONS
LIMITS
MIN
MAX
UNIT
V_CC
DC supply voltage
-0.5
+6.5
V
I_IK
DC input diode current
Vi<0
-50
mA
V_I
DC input voltage
V_I/O
DC input voltage range for
I/Os
Note 3
-0.5
+5.5
V
-0.5 Vcc +0.5
V
I_OK
DC output diode current
Vo> Vcc or Vo<0
+/-50
mA
V_O
I_O
I_O
I_CC, I_GND
DC output voltage
DC output source sink current
for VP/VM and RCV pins
DC output source or sink
current for D+/D- pins
DC Vcc or GND current
Note 3
Vo=0 to Vcc
Vo= 0 to Vcc
-0.5 Vcc +0.5
V
+/-15
mA
+/-50
mA
+/-100
mA
T_STO
Storage temperature range
P_TOT
Power dissipation per
package
-60
+150
˚_C
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or
any other conditions beyond those indicated under "Recommended Operating
Conditions" is not implied. Exposure to absolute maximum rated conditions for
extended periods may affect device reliability.
2. The performance capability of a high performance integrated circuit in
conjunction with its thermal environment can create junction temperatures
which are detrimental to reliability. The maximum junction temperature of this
integrated circuit should not exceed 150^˚C.
3. The input and output voltage ratings may be exceeded if the input and output
clamp current ratings are observed.
AU9254 USB Hub Controller V1.02W
Official Release_ Public
Page 14 of 23