OP16GN8 Datasheet, PDF (13/14 Pages) List of Unclassifed Manufacturers – Add device type 04 for device class V and radiation hardened requirements

STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 12-10-1
Approved sources of supply for SMD 5962-89543 are listed below for immediate acquisition information only and
shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be
revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a
certificate of compliance has been submitted to and accepted by DLA Land and Maritime -VA. This information
bulletin is superseded by the next dated revision of MIL-HDBK-103 and QML-38535. DLA Land and Maritime
maintains an online database of all current sources of supply at http://www.landandmaritime.dla.mil/Programs/Smcr/.
Standard
microcircuit drawing
PIN 1/
Vendor
CAGE
number
5962-8954301GA
3/
Vendor
similar
PIN 2/
OP-16AJ/883
3/
OP-16AH/883
5962-8954301PA
3/
OP-16AZ/883
5962-8954302GA
3/
OP-16BJ/883
3/
OP-16BH/883
5962-8954302PA
3/
OP-16BZ/883
5962-8954303GA
3/
OP-16CH/883
5962-8954303PA
3/
OP-16CZ/883
3/
OP-16CJ8/883
5962-8954304VGA
3/
OP-16AJ/QMLV
5962-8954304VPA
3/
OP-16AZ/QMLV
5962R8954304VGA 24355 OP-16AJ/QMLR
5962R8954304VPA 24355 OP-16AZ/QMLR
1/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
3/ Not available from an approved source of supply.
1 of 2