HAL320 Datasheet, PDF (13/13 Pages) List of Unclassifed Manufacturers – Differential Hall Effect Sensor IC

HAL 300, HAL 320
Data Sheet Supplement
Subject:
Data Sheet Concerned:
Supplement:
Edition:
Improvement of SOT-89B Package
HAL 300, 6251-345-1DS, Edition July 15, 1998
HAL 320, 6251-439-1DS, Edition July 15, 1998
No. 1/ 6251-532-1DSS
July 4, 2000
Changes:
– position tolerance of the sensitive area reduced
– tolerances of the outline dimensions reduced
– thickness of the leadframe changed to 0.15 mm (old 0.125 mm)
– HAL 300 now available in SOT-89B
– SOT-89A will be discontinued in December 2000
0.15
0.3
4 ±0.2
min.
0.25
1.15
4.55
sensitive area S₁
1.7
∅ 0.2
sensitive area S₂
2
∅ 0.2
y
x₁
x₂
1
2
3
2.55
top view
0.4
0.4
0.4
1.5
3.0
branded side
SPGS0022-5-B3/1E
0.06 ±0.04
Position of sensitive area
x₁+x₂
x₁= x₂
y
HAL 300
(2.05±0.001) mm
1.025 mm nominal
0.95 mm nominal
HAL 320
(2.25±0.001) mm
1.125 mm nominal
0.95 mm nominal
Note: A mechanical tolerance of ±0.05 mm applies to all dimensions where no tolerance is explicitly given.
Position tolerances of the sensitive areas are defined in the package diagram.
Micronas
page 1 of 1