5002C-CGT Datasheet, PDF (13/23 Pages) List of Unclassifed Manufacturers – Dual SCART A/V Switch

AVPro^® 5002C
Dual SCART A/V Switch
PIN DESCRIPTIONS (Continued)
NAME
Enc_YC
Enc_Y
Enc2_Y
Enc_C
Enc2_C
Lin
Rin
TV_YCin
TV_Lin
TV_Rin
Aux_YCout
Aux_Lout
Aux_Rout
Aux_Mono
BLANK
Lout
Rout
Mod_Mono
TYPE
I
I
I
I
I
I
I
I
I
I
O
O
O
O
O
O
O
O
DESCRIPTION
Encoder Video Input: In a typical system, this pin is connected to the composite video
output pin from the external video encoder device. This input can be selected as the
signal source for the AUX_YCout, TV_YCout and/or VCR_YCout pins.
Encoder Luma Input: In a typical system, this pin is connected to the composite video
output pin from the external video encoder device. In SVHS mode, this input can be
selected as the signal source for the TV_YCout pin and/or the Aux_YCout pin.
Encoder 2 Luma Input: In a typical system, this pin is used as an alternate source for S-
video luma information to a VCR when OSD information is not desired. This input can
be selected as the signal source for the Aux_YCout pin.
Encoder Chroma Input: In a typical system, this pin is connected to the TV_R output pin
from the external video encoder device. In the SVHS mode, this input can be selected
as the signal source for the TV_R pin and/or the Aux_Cout output pin.
Encoder 2 Chroma Input: In a typical system, this pin is used as an alternate source for
S-video chroma information to a VCR when OSD information is not desired. This input
can be selected as the signal source for the Aux_Cout output pin.
Left Audio Input: In a typical system, this pin is connected to the left audio output pin of
the external audio DAC. This input can be selected as the signal source for the
TV_Lout and/or Aux_Lout pins.
Right Audio Input: In a typical system, this pin is connected to the right audio output pin
of the external audio DAC. This input can be selected as the signal source for the
TV_Rout and/or Aux_Rout pins.
TV Composite Video input: This pin accepts composite video from the TV SCART. This
pin can be selected as the source for the Aux_YCout pin.
TV Left Audio input: This pin accepts audio from the TV SCART. This pin can be
selected as the source for the Aux_Lout audio output and the Lout audio output.
TV Right Audio input: This pin accepts audio from the TV SCART. This pin can be
selected as the source for the Aux_Rout audio output and the Rout audio output.
Auxiliary Video Output: This pin is the composite video output to the auxiliary SCART
connector (pin 19). In the SVHS mode, this pin is the luma output.
Auxiliary Left Audio Output: This pin is the output to the left channel audio (pin 3) of the
auxiliary SCART connector.
Auxiliary Right Audio Output: This pin is the output to the right channel audio (pin1) of
the auxiliary SCART connector.
Auxiliary Mono Output: This pin is equivalent to the sum of the output signals on
Aux_Lout and Aux_Rout.
Blanking output: This output provides the blanking signal to the TV SCART connector
(pin 16). This signal is either the blanking signal from the auxiliary SCART connector
(ABLANK ) or the external video encoder (EBLANK).
Left Audio Output: This pin is the output to the left channel audio RCA jack.
Right Audio Output: This pin is the output to the right channel audio RCA jack.
Mono Audio Output: This pin is sum of Lout & Rout to the RF modulator input.
13