5002C-CGT Datasheet, PDF (12/23 Pages) List of Unclassifed Manufacturers – Dual SCART A/V Switch

AVPro^® 5002C
Dual SCART A/V Switch
PIN DESCRIPTIONS (Pins marked N/C should be left unconnected during normal use)
NAME
TYPE
Analog Pins
ABLANK
I
Aux_R
I
Aux_G
I
Aux_B
I
Aux_Fnc
I/O
Aux_Cin
I
Aux_YC
I
Aux_Lin
I
Aux_Rin
I
EBLANK
I
Enc_R
I
Enc_G
I
Enc_B
I
DESCRIPTION
Auxiliary Blanking Input: In a typical system, this pin is connected to the RGB status pin
(pin 16) from the auxiliary SCART connector.
Auxiliary Red Input: In a typical system, this pin is connected to the RED input pin (pin
15) of the auxiliary SCART connector. This input can be selected as the signal source
for the TV_R output pin.
Auxiliary Green Input: In a typical system, this pin is connected to the GREEN input pin
(pin 11) of the auxiliary SCART connector. This input can be selected as the signal
source for the TV_G output pin.
Auxiliary Blue Input: In a typical system, this pin is connected to the BLUE input pin (pin
7) of the auxiliary SCART connector. This input can be selected as the signal source for
the TV_B output pin.
Auxiliary Function Pin: This is a bi-directional pin. As an input, it digitizes the analog
voltage on the auxiliary SCART function pin. As an output, it puts out one of three
voltage levels to the auxiliary SCART function pin.
Auxiliary Chroma Input: In a typical application, this pin is AC coupled to the Red input
line from the Auxiliary SCART connector. When the SVHS mode is selected from the
Auxiliary SCART video source, this pin is internally summed to the Aux_YC input to
generated a composite video signal for the Mod_YC output.
Auxiliary Video Input: In a typical system, this pin is connected to the composite video
input pin (pin 20) of the auxiliary SCART connector. This input can be selected as the
signal source for the TV_YCout.
Auxiliary Left Audio Input: In a typical system, this pin is connected to the L Audio
Output pin (pin 3) of the auxiliary SCART connector. This input can be selected as the
signal source for the TV_Lout.
Auxiliary Right Audio Input: In a typical system, this pin is connected to the R Audio
Output pin (pin 1) of the auxiliary SCART connector. This input can be selected as the
signal source for the TV_Rout.
Encoder Blanking Input: In a typical system, this pin is connected to the blanking signal
from the external video encoder device.
Encoder Red Input: In a typical system, this pin is connected to the RED output pin from
the external video encoder device. This input can be selected as the signal source for
the TV_R output pin.
Encoder Green Input: In a typical system, this pin is connected to the GREEN output pin
from the external video encoder device. This input can be selected as the signal source
for the TV_G output pin.
Encoder Blue Input: In a typical system, this pin is connected to the BLUE output pin
from the external video encoder device. This input can be selected as the signal source
for the TV_B output pin.
12