EN29F002N Datasheet, PDF (12/32 Pages) List of Unclassifed Manufacturers – 2 Megabit (256K x 8-bit) Flash Memory

EN29F002 / EN29F002N
Table 6. Status Register Bits
DQ
Name
Logic Level
Definition
‘1’
Erase Complete or
erase sector in Erase suspend
‘0’
Erase On-Going
DATA
7
POLLING
DQ7
Program Complete or
data of non-erase sector
during Erase Suspend
DQ7
Program On-Going
‘-1-0-1-0-1-0-1-’ Erase or Program On-going
DQ6
Read during Erase Suspend
TOGGLE
6
BIT
‘-1-1-1-1-1-1-1-‘
Erase Complete
5
ERROR BIT
‘1’
Program or Erase Error
‘0’
Program or Erase On-going
ERASE
‘1’
3
TIME BIT
Erase operation start
‘0’
Erase timeout period on-going
‘-1-0-1-0-1-0-1-’
Chip Erase, Erase or Erase
suspend on currently
addressed
sector. (When DQ5=1, Erase
Error due to currently
addressed sector. Program
during Erase Suspend on-
going at current address
2
TOGGLE
BIT
DQ2
Erase Suspend read on
non Erase Suspend Sector
Notes:
DQ7 DATA Polling: indicates the P/E C status check during Program or Erase, and on completion before checking bits
DQ5 for Program or Erase Success.
DQ6 Toggle Bit: remains at constant level when P/E operations are complete or erase suspend is acknowledged.
Successive reads output complementary data on DQ6 while programming or Erase operation are on-going.
DQ5 Error Bit: set to “1’ if failure in programming or erase
DQ3 Sector Erase Command Timeout Bit: Operation has started. Only possible command is Erase suspend (ES).
DQ2 Toggle Bit: indicates the Erase status and allows identification of the erased sector.
4800 Great America Parkway, Suite 202
12
Santa Clara, CA 95054
Rev. C, Issue Date: 2001/07/05
Tel: [phone]
Fax: [phone]