WT62P1 Datasheet, PDF (1/48 Pages) List of Unclassifed Manufacturers – microcontroller for digital controlled monitor with Universal Serial Bus (USB) interface

WT62P1
Data Sheet Rev. 1.01
GENERAL DESCRIPTION
The WT62P1 is a microcontroller for digital controlled monitor with Universal Serial Bus (USB) interface.
It contains an 8-bit CPU, 32K bytes flash memory, 512 bytes RAM, 14 PWMs, parallel I/Os, SYNC signal
processor, timer, DDC1/2B interface, master/slave I²C interface, low speed USB device module, 6-bit
A/D converter and watch-dog timer.
FEATURES
• 8-bit 6502 compatible CPU with 6MHz operating frequency
• 32768 bytes flash memory, 512 bytes SRAM
• 12MHz crystal oscillator
• 14 channels 8-bit PWM outputs
• Sync signal processor with H+V separation, H/V frequency counter, H/V polarity detection/control and
clamp pulse output
• Six free-running sync signal outputs (Horizontal frequency up to 106KHz)
• Self-test pattern
• DDC1/2B supported
• Fast mode master/slave I²C interface (up to 400KHz)
• Embedded USB function with endpoint 0 and endpoint 1
• Built-in 3.3V regulator for USB tranceiver
• Watch-dog timer
• Maximum 28 programmable I/O pins
• One 8-bit programmable timer
• 6-bit A/D converter with 4 selectable inputs
• One external interrupt request input
• Low VDD reset
ORDERING INFORMATION
Package Type
42-pin PDIP
42-pin Shrink PDIP
40-pin PDIP
28-pin skinny PDIP
44-pin SOP
Part Number
WT62P1-N42
WT62P1-K42
WT62P1-N40
WT62P1-N28
WT62P1-S44
Weltrend Semiconductor, Inc.
Page 2