SPT9404 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – SINGLE VIDEO DRIVER

FEATURES
• Single Video Line Driver Chip
• R_L=150 Ω (75 Ω Back-Terminated Cable)
• Power-Down Standby Mode
• Tiny 2.9 x 1.6 mm 6-Lead SOT23 Package
• Low Power Dissipation: 32 mW
• Flat Response f_IN = 100 kHz to 10 MHz (typical)
• Single +5 Volt Power Supply
SPT9404
SINGLE VIDEO DRIVER
APPLICATIONS
• Digital Video Disk
• Video Line Driver for Encoders
• Digital Video Tape Recorders
• Video Cassette Recorders
• PC Multimedia
• Consumer Video
GENERAL DESCRIPTION
The SPT9404 is a single video line driver chip that takes a
standard video signal as an analog input and provides a
buffered analog output for driving a 150 Ω load (75 Ω back-
terminated cable). The standard video input signal (1 V_P-P) is
typically amplified 6 dB using external components to pro-
duce a 2 V_P-P into an AC-coupled 150 Ω load. (See the typical
interface circuit diagram.)
The SPT9404 features a standby mode which draws only
96 µW of power. Nominal power dissipation (no input) is
typically 32 mW. It requires a single +5 V supply, operates
over the commercial temperature range (0 to +70 °C) and is
available in a tiny surface mount (2.9 x 1.6 mm) 6-lead SOT-
23 package.
BLOCK DIAGRAM
VCC
+ Input
- Input
Driver
Output
Standby
GND
Signal Processing Technologies, Inc.
4755 Forge Road, Colorado Springs, Colorado 80907, USA
Phone: [phone] FAX: [phone]