MTV212M64 Datasheet, PDF (1/27 Pages) List of Unclassifed Manufacturers – 8051 Embedded Monitor Controller MTP Type

MYSON
TECHNOLOGY
MTV212M64
(Rev. 1.2)
8051 Embedded Monitor Controller
MTP Type
FEATURES
• 8051 core, 12MHz operating frequency.
• 1024-byte RAM, 64K-byte program Flash-ROM.•
• Maximum 14 channels of 9V open-drain PWM DAC.
• Maximum 32 bi-directional I/O pins.
• SYNC processor for composite separation/insertion, H/V polarity/frequency check, polarity adjustment
and programmable clamp pulse output.
• Built-in self-test pattern generator with three free-running timings.
• Built-in low power reset circuit.
• Compliant with VESA DDC1/2B/2Bi/2B+ standard.
• Dual slave IIC addresses.
• Single master IIC interface for internal device communication.
• 4-channel 6-bit ADC.
• Watchdog timer with programmable interval.
• Compliant with Low Speed USB Spec.1.1 including 2 Endpoints: one is Control endpoint (8-byte IN & 8-
byte OUT FIFOs), the other one is Interrupt endpoint (8-byte IN FIFO).
• Built-in 3.3V regulator for USB Interface.
• 40-pin DIP, 42-pin SDIP or 44-pin PLCC package.
GENERAL DESCRIPTIONS
The MTV212M micro-controller is an 8051 CPU core embedded device specially tailored to Monitor
applications. It includes an 8051 CPU core, 1024-byte SRAM, SYNC processor, 14 built-in PWM DACs,
VESA DDC interface, 4-channel A/D converter, Low Speed USB Interface and a 64K-byte internal program
Flash-ROM.
BLOCK DIAGRAM
This datasheet contains new product information. Myson Technology reserves the rights to modify the product specification without
notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product.
Revision 1.2
-1-
2000/07/04