MSK4300 Datasheet, PDF (1/5 Pages) M.S. Kennedy Corporation – 10 AMP, 75V, 3 PHASE MOSFET BRIDGE WITH INTELLIGENT INTEGRATED GATE DRIVE

ISO 9001 CERTIFIED BY DSCC
4300 _{M.S.KENNEDY CORP.}
10 AMP, 75V, 3 PHASE MOSFET
BRIDGE WITH INTELLIGENT
INTEGRATED GATE DRIVE
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
MIL-PRF-38534 QUALIFIED
75 Volt Motor Supply Voltage
10 Amp Output Switch Capability, All N-Channel MOSFET Output Bridge
100% Duty Cycle High Side Conduction Capable
Suitable for PWM Applications from DC to 100KHz
Shoot-Through/Cross Conduction Protection
Undervoltage Lockout Protection
Programmable Dead-Time Control
Low Active Enable for Bridge Shutdown Control
Isolated Package Design for High Voltage Isolation Plus Good Thermal Transfer
Available with Three Lead Bend Options
DESCRIPTION:
The MSK 4300 is a 3 phase MOSFET bridge plus drivers in a convenient isolated hermetic package. The hybrid is
capable of 10 amps of output current and 75 volts of DC bus voltage. It has a full line of protection features,
including undervoltage lockout protection of the bias voltage, cross conduction control and a user programmable
dead-time control for shoot-through elimination. In addition, the bridge may be shut down by using the EN (enable)
control. The MSK 4300 provides good thermal conductivity for the MOSFETs due to the electrically isolated package
design that allows direct heat sinking of the device without insulators.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
3 Phase Brushless DC
Servo Control
Fin Actuator Control
Gimbal Control
3 Phase AC
Induction Motor Control
HVAC Blower Control
1
Rev. C 6/00