MMA701-SOT89 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – High Linearity Packaged HBT

MMA701-SOT89
High Linearity Packaged HBT
FEATURES
• +45 dBm IP3 at 2.1 GHz
• +25 dBm Output Power at P-1dB Compression
• 50% Power added efficiency (typical)
• 100 MHz to 4000 MHz Operation
The MMA701 is an InGaP Heterojunction Bipolar Transistor (HBT)
amplifier in a low cost SOT-89 surface mount package. The MMA701
will produce +45 dBm OIP3 at the minimum bias voltage. The
combination of low noise figure and high intercept point make it
ideal for transmitter and receiver applications.
The MMA is ideally suited for Cellular/PCS, 2.5/3G, WLL and MMDS
systems and other types of Wireless applications where high gain,
P1dB, OIP3, and convenient power down is required. Custom
packages and Die options are available. Consult the factory for
details.
G
MMA
701
B
G
C
Application notes are available
at www.metelics.com.
ELECTRICAL SPECIFICATIONS
Parameter
Symbol
Gain
Output Power
Intercept
ACPR (W-CDMA)
SSG
P-1dB
OIP3
ACPR
Noise Figure
NF
Test Conditions
icc = 130 ma
icc = 130 ma
icc = 130 ma
icc = 130 ma
+17 dbm output
5 MHz offset
icc = 130 ma
Minimum
@ +5
VDC
11.5
+24.5
+42
Typical
@ +5
VDC
12.2
+25
+45
-59
3
Typical
@ +7
VDC
12.2
+27
+47
-65
Maximum
3.5
1. T = 25° C, Frequency: 2140 MHz, matched to 50 ohm system
2. OIP3 measured with two tones at an output power of +12 dBm/tone. Tone separation of 1.2288 MHz.
Units
dB
dBm
dBm
dB
dB
ABSOLUTE MAXIMUM RATINGS
Parameter
Operating Case Temperature
Storage Temperature
Junction Temperature
Thermal Resistance
Supply Voltage, Vceo
Input RF Power (continuous)
Rating
-40°C to +85°C
-40°C to +125°C
+230°C
70°C/W
+10 V
+18 dBm
Operation of this device above any of these parameters may cause permanent damage.
975 Stewart Drive • Sunnyvale, CA 94085 • www.metelics.com
PH 408.737.8181 • FX 408.733.7645 • [e-mail]
© Copyright 2001 MCE Metelics. All rights reserved. Specifications subject to change without notice. Revision date 09.15.01.