HY2004 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 120 WATTS Power Amplifier

DATA SHEET
HY2004 120 WATTS
The ILP HY2004 Power Amplifier is a fully encapsulated high quality power amplifier
with Integral heatsink.
By selecting the appropiate mains transformer and programming link the
amplifier can be used with 4 or 8Ω loads with the automatic adjustment of input
sensitivity.
Mounting can be achieved by the use of T-slots in the heatsink and the nuts and
bolts provided.
TYPICAL SPECIFICATIONS
Parameter
Output Power
Frequency Response (-3dB)
Total Harmonic Distortion @ 1kHz
Signal to Noise Ratio (DIN AUDIO)
Slew Rate typical
Rise Time
Input Sensitivity
Input Impedance
Damping Factor(8Ω @ 100Hz)
Load Impedance (programmable)
Maximum D.C. rails (8Ω load)
Size Width x Height x Extrusion Cut
Weight
Value
150W rms. Max
15Hz - 50kHz
0.005%
100dB
20V/µS
5µS
500mV rms.
100KΩ
>400
4 or 8Ω
±55V
120x75x80mm
835g
• FEATURES
• Programmable 4 or 8Ω
operation
• Enhanced specifications
• Anti-thump Circuitry
• Integral heatsink
• Thermal Protection
• PTH Circuit Board
POWER SUPPLY REQUIREMENTS
• Encapsulated
ILP have developed a range of Hi-Fi quality Low noise Audio Power Toroidal
Transformers for the HY2004 they are Low Profile with Resin filled centres for
maximum noise absorption and ease of mounting. Finished in black to match the
amplifiers these transformers are the ideal choice to power the HY2004.
Mode
4Ω
8Ω
Transformer
AT1204
AT1208
RMS Supply Voltage
32 - 0 - 32v
40 - 0 - 40v
Size
110x50mm
110x50mm
Weight
2.1Kg
2.1Kg
SPONG LANE ELMSTED ASHFORD KENT TN25 5JU
PHONE [phone] FAX [phone]