HA6025 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 25-125Amp 600 Vac AC Output

Series HA60/HD60
25-125Amp • 600 Vac • AC Output
• Zero Voltage and Random
Turn-On Switching
• Panel Mount
• 1200V Blocking Capability
• 600Vac - the preferred
choice in Canada
• Integrated Overvoltage
Protection by Automatic
Self Turn-On (Suffix P)
Featuring state-of-the-art Surface
Mount Technology, these SPST-NO
relays deliver proven reliability in the
most demanding applications.
Output consists of an SCR AC switch
and is available in zero-cross, random
turn-on (phase controllable) and ver-
sions with either AC or DC input (coil)
control.
Manufactured in Crydom’s ISO 9001
Certified facility for optimum product
performance and reliability.
M O D E L N U M B E R S ^{AC CONTROL}
D C CONTROL
OUTPUT SPECIFICATIONS ➀
Nominal Line Voltage (±10%) [Vrms]
HA6025
HD6025
600
HA6050
HD6050
600
HA6090
HD6090
600
HA60125
HD60125
600
Operating Voltage Range (47-63 Hz) [Vrms]
48-660
48-660
48-660
48-660
Max. Load Current _➂ [Arms]
25
50
90
125
Min. Load Current, [mArms]
40
40
40
150
Transient Overvoltage [Vpk]
1200
1200
1200
1200
Max. Surge Current, (16.6ms) [Apk]
250
625
1,200
1,750
Max. On-State Voltage Drop @ Rated Current [Vpk]
1.7
1.7
1.7
1.7
Thermal Resistance Junction to Case (R_θJC) [˚ C/W]
Maximum I ² t for Fusing, (8.3 msec.) [A ^2sec]
Max. Off-State Leakage Current @ Rated Voltage [mArms] ➆
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁
Max. Turn-On Time ➄
1.02
0.63
0.28
0.22
260
1,620
6,000
12,700
5
5
5
5
500
500
500
500
1/2 Cycle (DC Input), 10.0 msec (AC Input)
Max. Turn-Off Time
1/2 Cycle (DC Input), 40.0 msec (AC Input)
Power Factor (Min.) with Max. Load
0.5
0.5
0.5
0.5
INPUT SPECIFICATIONS ➀
Control Voltage Range
DC CONTROL
(D PREFIX)
3-32 Vdc
AC CONTROL
(A PREFIX) ➃
90-280 Vrms (60Hz)
AC CONTROL
(E SUFFIX)
18-36 Vrms
Max. Reverse Voltage
-32 Vdc
---
---
Max. Turn-On Voltage
3.0 Vdc
90 Vrms
18 Vrms
Min. Turn-Off Voltage
Nominal Input Impedance
Typical Input Current
1.0 Vdc
See Note ➅
2.0 mA ➅
10 Vrms
4.0 Vrms
60K Ohms
9.0K Ohms
2mA @ 120 Vrms, 4mA @ 240 Vrms 3mA @ 24 Vrms
GENERAL NOTES
➀ All parameters at 25˚C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
➂ Heat sinking required, for derating curves see page 2.
➃ 24 Vac Input option, E suffix.
➄ Turn-on time for random turn-on versions is 0.02 msec (DC Control Models).
➅ Input circuitry incorporates active current limiter.
➆ No internal snubber.
© 2002 CRYDOM CORP, Specifications subject to change without notice.
FastFax Document No.159
SERIES HA/HD60.
Rev. 031802
PAGE 1 OF 3
For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [e-mail] WEB SITE: http://www.crydom.com
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]