BT829A Datasheet, PDF (1/136 Pages) List of Unclassifed Manufacturers – VideoStream DECODER

Advance Information
This document contains information on a product under development. The para-
metric information contains target parameters that are subject to change.
Bt829A/827A
VideoStream II Decoders
Bt829A– Video Capture Processor & Scaler for
TV/VCR Analog Input
Bt827A– Composite Video and S-Video Decoder
The Bt829A and Bt827A VideoStream™ Decoders are a family of single-chip, pin-
and register-compatible, composite NTSC/PAL/SECAM video and S-Video decod-
ers. They are also pin and register backward compatible with the Bt829/827 family
of products. Low operating power consumption and power-down capability make
them ideal low-cost solutions for PC video capture applications on both desktop and
portable system platforms. They support square pixel and CCIR601 resolutions for
NTSC, PAL and SECAM video. They have a flexible pixel port which supports a
variety of system interface configurations, and they are offered in 100-pin PQFP and
100-pin TQFP packages.
Functional Block Diagram
MUX0
MUX1
MUX2
MUX3
MUXOUT
SYNCDET
REFOUT
YREF+
YIN
YREF–
CREF+
CIN
CREF–
Analog
MUX
AGC
40 MHz
ADC
40 MHz
ADC
XT0 XT1
Ultralock™
and
Clock
Generation
I²C JTAG
Video
Timing
Unit
Luma-Chroma
Separation
and
Chroma
Demodulation
Spatial and
Temporal
Scaling
Video
Timing
Output
Control
16
Output
Data
Distinguishing Features
• Single-chip composite/S-Video
NTSC/PAL/SECAM to YCrCb digitizer
• On-chip Ultralock™
• Square pixel and CCIR601 resolution for:
– NTSC (M)
– NTSC (M) without 7.5IRE pedestal
– PAL (B, D, G, H, I, M, N, N
combination)
– SECAM
• Chroma comb filter
• Arbitrary horizontal and 5-tap vertical
filtered scaling
• Hardware closed-caption decoder
• Vertical Blanking Interval (VBI) data
pass-through
• Arbitrary temporal decimation for a
reduced frame-rate video sequence
• Programmable hue, brightness, saturation,
and contrast
• User-programmable cropping of the video
window
• 2x oversampling to simplify external
analog filtering
• Two-wire Inter-Integrated Circuit (I²C)
bus interface
• 8- or 16-bit pixel interface
• YCrCb (4:2:2) output format
• Software selectable four-input analog
MUX
• 4 fully programmable GPIO bits
• Auto NTSC/PAL format detect
• Automatic Gain Control (AGC)
• Typical power consumption 0.85 W
• IEEE 1149.1 Joint Test Action Group
(JTAG) interface
• 100-Pin PQFP and TQFP packages
Related Products
• Bt819A, Bt829, Bt856/857, Bt864/865,
Bt866/867, Bt852
Applications
• Multimedia
• Image processing
• Desktop video
• Video phone
• Teleconferencing
• Interactive video