24A01 Datasheet, PDF (1/24 Pages) List of Unclassifed Manufacturers – 1K/2K/4K/8K/16K-bit Serial EEPROM for Low Power

TMC ^{24A01/24A02/24A04/24A08/24A16}
1K/2K/4K/8K/16K-bit
Serial EEPROM for Low Power
Data Sheet
OVERVIEW
The TMC 24A01/24A02/24A04/24A08/24A16 serial EEPROM has a 1,024/2,048/4,096/8,192/16,384-bit
capacity, supporting the standard I²C™-bus serial interface. It is fabricated using TMC’s most advanced
CMOS technology. It has been developed for low power and low voltage applications (1.8 V to 5.5 V). One of its
major feature is a hardware-based write protection circuit for the entire memory area. Hardware-based write
protection is controlled by the state of the write-protect (WP) pin. Using one-page write mode, you can load up to
16 bytes of data into the EEPROM in a single write operation. Another significant feature of the
TMC 24A01/24A02/24A08/24A16 is its support for fast mode and standard mode.
FEATURES
I²C-Bus Interface
• Two-wire serial interface
• Automatic word address increment
EEPROM
• 1K/2K/4K/8K/16K-bit
(128/256/512/1,024/2,048-byte) storage area
• 16-byte page buffer
• Hardware-based write protection for the entire
EEPROM (using the WP pin)
• EEPROM programming voltage generated
on chip
• 1,000,000 erase/write cycles
• 100 years data retention
• 24AXXL Marking means Lead Free product
• 24AXXG Marking means Green product
Operating Characteristics
• Operating voltage
— 1.8 V to 5.5 V
• Operating current
— Maximum write current: < 3 mA at 5.5 V
— Maximum read current: < 200 µA at 5.5 V
— Maximum stand-by current: < 5 µA at 5.5 V
• Operating temperature range
— – 25°C to + 70°C (commercial)
— – 40°C to + 85°C (industrial)
• Operating clock frequencies
— 100 kHz at standard mode
— 400 kHz at fast mode
• Electrostatic discharge (ESD)
— 5,000 V (HBM)
— 500 V (MM)
Packages
• 8-pin DIP, SOP, TSSOP, and SOT 25
1