8340-G Datasheet, PDF (5/6 Pages) ETAL Group – Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Accessories
Socket
18-P10-Si
(for ratings >16 A please contact E-T-A)
retaining clip
(accessory)
10
.394
Polarized socket with
adapter
18-P10-Si-20025
blade terminal A6.3-0.8 (QC .250)
to DIN 46244 polarized to ensure
correct connection
10 mm
.394 in.
depth
Hex nut
Y 300 116 02
M12x1
SW14
.551
Spring washer
Y 300 118 03
1.2±0.5
.047±.020
ø12^+0.2
.472^+.008
2.5
thickness
ø15 0.4 mm
.098
.591 ^{.016 in.}
80
19
3.15
.748
Accessories for push button
1
top-hat rail
EN 50022-35x7.5 adapter X 200 409 01
Splash cover with hex nut and O ring (IP66 and IP67)
X 200 801 08 (nickel plated hex nut M12x1,
splash cover transparent)
polarization recess
G profile
EN 50035-G32
X 200 801 03 (black finish hex nut M12x1,
splash cover black)
Bus bar (10-way) (supplied as a complete package)
for type 18 socket
(for max. 100 A continuous load),
more positions available on request
X 211 158 01 with terminal
X 211 158 02 without terminal
Phoenix terminal AKG 35
cylinder-head-screw
washer
cross section max 35 mm² (AWG 2) M4x4 ISO 1207 nickel-plated A4.3 DIN 125
nickel plated
SW 17
M12x1
female connector
Splash seal, black, hex nut and O ring (IP54)
X 200 802 01 (nickel plated hex nut M12x1,
splash seal black)
7
M4 ^{copper rail}
SW 17
.276
tin-plated
19
.748
223
8.78
Insulated sleeving for bus bars
Y 303 824 11
9
.354
5.4
.213
fusible link
(constriction 1 mm/.039 in. thick)
190
7.48
Actuator extension
X 200 803 01 (black button)
Retaining clip for socket 18-P10-Si
Y 300 579 11
52
2.05
60
2.36
mounting dimensions
Shock directions / Mounting attitudes
1
2
4
3
6
35
1.38
Connector bus link -P10
X 210 588 01/1.5 mm² (AWG 16), brown (up to 13 A max. load)
X 210 588 02/2.5 mm² (AWG 14), black (up to 20 A max. load)
X 210 588 03/2.5 mm² (AWG 14), red (up to 20 A max. load)
X 210 588 04/2.5 mm² (AWG 14), blue (up to 20 A max. load)
100 quick-connect tabs 6.3 (.250)
DIN 46247 tinned brass,
insulated
5
1 11 23 2(i) 24 12
This
is
a
metric
design
and
millimeter
dimensions
take
precedence
(
mm
inch
)
All dimensions without tolerances are for reference only. In the interest of improved design,
performance and cost effectiveness the right to make changes in these specifications
without notice is reserved.Product markings may not be exactly as the ordering codes.
Errors and omissions excepted.
1646
www.e-t-a.de
5