PBL40215 Datasheet, PDF (1/22 Pages) Ericsson – RF Transceiver circuit for the Digital Enhanced Cordless Telecommunications (DECT) system

Preliminary
JaPnuBaLry420020115
PBL 402 15
RF Transceiver circuit for the Digital
Enhanced Cordless Telecommunications
(DECT) system
Description.
Key features.
The PBL 402 15 is a complete RF transceiver to be used in the Digital Enhanced
Cordless Telecommunications ( DECT ) system. It is designed to interface to various
base-band controllers.
The circuit contains transmit and receive functions that share integrated high stability
VCO´s and a phase locked loop function ( PLL ). All functionality is controlled through a
3-wire bus interface with optional hard wire lines.
The receive section comprises of a low noise image reject down conversion to the
first intermediate frequency, an external channel filter, a second down convertion to a
second intermediate frequency, an integrated channel pass filter, a high gain limiting
amplifier, a received signal strenght indicator with DC compensation loop, a self aligned
frequency discriminator and a preamble based data slicer.
The transmit section comprises of a signal gate and a pre-power amplifier. Data
transmission is achieved by direct open loop modulation of the Tx VCO.
• High Tx output power to +7dBm
• Integrated PLL and high stability
VCO´s
• 3-line serial interface bus
• Minimum 2.7 V supply voltage
• Low current consumption
• Differential Rx input and Tx output
• Flexible interface to various base-
band controllers
• Exellent performance with Ericsson´s
power amplifier PBL403 09
• Low cost
Applications:
• DECT Handset and base station
• Wireless local area network ( WLAN )
• Wireless local loop ( WLL )
Figure 1. Block diagram.
PBL ^{402 15}
Figure 2. Package outlook.
1