S1C17555 Datasheet, PDF (1/5 Pages) Epson Company – 16-bit Single Chip Microcontroller

S1C17555/565/955/965
16-bit Single Chip Microcontroller
z Built-in FSA (Flexible Signal processing Accelerator) function;
It realize high processing with low power
z 12-bit A/D converter
z Several kinds of serial interface
z 48-pin wafer-chip-scale package (WCSP)
z Built-in the flash memory that it can write with a single power supply
■ DESCRIPTIONS
S1C17555/565/955/965 can operate at high speed with low power and it has large address area.
These products have good points such as Space-saving package (WCSP), 12-bit A/D converter and Signal
processing accelerator(FSA) every model and selectable depending on a use.
In FSA, signal processing ranging from image processing to audio handling is possible.
S1C17955/965 is most suitable for the application such as mobile devices. FSA realize high processing with a low
clock, and realize a low consumption design by using this function.
„ FEATURES
機種
CPU
CPU core
Multiplier/Divider (COPRO)
FSA *1
Multiply and accumulation unit
Data access
Address space
Embedded Flash memory
Capacity
Erase/program count
Other
Embedded RaM
RAM1 Capacity
RAM2 (FSA RAM) Capacity
Clock generator (ClG)
System clock source
IOSC oscillator circuit
OSC3 oscillator circuit
OSC1 oscillator circuit
Other
I/O ports (P)
Number of general-purpose
I/O ports
Serial interfaces
8-bit SPI (SPI)
16-bit SPI (SPI16)
I²C master (I2CM)
I²C slave (I2CS)
UART（UART）
IR remote controller (REMC)
Timers
16-bit timer (T16)
Fine mode 16-bit timer (T16F)
16-bit PWM timer (T16A2)
Clock timer (CT)
Stopwatch timer (SWT)
Watchdog timer (WDT)
S1C17555
S1C17565
S1C17955
S1C17965
Seiko Epson original 16-bit RISC CPU core S1C17
• 16-bit × 16-bit multiplier
• 16-bit × 16-bit + 32-bit multiply and accumulation unit
• 16-bit ÷ 16-bit divider
-
32-bit × 32-bit multiplier + 72-bit adder
-
2 inputs and 1 output
12K bytes
128K bytes (for both instructions and data)
40 times (min.) (Applied only when FLS V1.0 or later is used.)
• Read/program protection function
• An embedded power supply booster for erasing/programming
• Allows on-board programming using a debugging tool such as ICDmini.
4K bytes
12K bytes
2 sources
3 sources
2 sources
(IOSC/OSC1)
(IOSC/OSC1/OSC3)
(IOSC/OSC1)
2/4/8/12 MHz (typ.) internal oscillator circuit
–
24 MHz (max.) crystal
–
or ceramic oscillator
circuit
Supports an external
clock input.
32.768 kHz (typ.) crystal oscillator circuit. Supports an external clock input.
• Core clock frequency control
• Peripheral module clock supply control
3 sources
(IOSC/OSC1/OSC3)
24 MHz (max.) crystal
or ceramic oscillator
circuit
Supports an external
clock input.
Max. 20 bits
Max. 24 bits
Pins are shared with the peripheral I/O.
Max. 20 bits
Max. 24 bits
2 channels
1 channel
1 channel
1 channel
1 channel
(IrDA1.0 supported)
–
2 channels
(IrDA1.0 supported)
1 channel
1 channel
(IrDA1.0 supported)
–
2 channels
(IrDA1.0 supported)
1 channel
3 channels
2 channels
4 channels
1 channel
1 channel
1 channel