B7680 Datasheet, PDF (6/12 Pages) EPCOS – SAW Duplexer WCDMA Band IV (AWS)

SAW Components
SAW Duplexer
Data Sheet
B7680
1732.5 / 2132.5 MHz
Maximum ratings
Temperature range for specifi-
cation ¹⁾
T
Operable temperature range²⁾ T
Storage temperature range
DC voltage
ESD voltage
Input power at
T_stg
V_DC
V_ESD
P_IN
1710.0 ... 1755.0 MHz
elsewhere
-20/+85
–30/+85 ˚C
–40/+85 ˚C
5
V
50³⁾ V
29 dBm
10 dBm
machine model, 10 pulses
source and load impedance 50 Ω
} continuous wave
T = 50˚C, 5.000 h
1) _{Defines the temperature range in which the specification values are warranted.}
2) _{Defines the temperature range in which the SAW device keeps its typical characteristics, however the}
specification values are not guaranteed.
3) _{acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.}
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, α_WCDMA) is determined by
∫∞ Sds21(f )HRRC(f – fCarrier) 2df
∞
f_Carrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, f_Carrier ranges from
826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). H_RRC(f) is the transfer func-
tion of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the
following normalization:
∫∞ HRRC(f ) 2df = 1
∞
Please read cautions and warnings and
important notes at the end of this document.
6 June 06, 2008