B7680 Datasheet, PDF (4/12 Pages) EPCOS – SAW Duplexer WCDMA Band IV (AWS)

SAW Components
SAW Duplexer
Data Sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
B7680
1732.5 / 2132.5 MHz
T = –20 ˚C to +85 ˚C
Z_ANT= 50 Ω
Z_RX = 100 Ω
Z_TX = 50 Ω
Characterisitcs ANT - RX
Center frequency
min. typ. max.
@ 25 ˚C
f_C
2132.5
MHz
Maximum insertion attenuation
@f_carrier2112.4 ... 2152.6
Amplitude ripple (p-p)
@f_carrier2112.4 ... 2152.6
Amplitude ripple (p-p)
per 5 MHz-channel
2110.0 ... 2155.0
Error Vector Magnitude
@f_carrier2112.4 ... 2152.6
MHz _αWCDMA1)
MHz _{∆αWCDMA1)}
MHz _∆αch
MHz _EVM2)
2.1
2.5 dB
0.3
1.0 dB
0.2
0.5 dB
0.5
2.0 %
Input VSWR (ANT port)
2110.0 ... 2155.0 MHz
1.6
2.0
Output VSWR (RX port)
2110.0 ... 2155.0 MHz
1.8
2.0
Output phase balance (φ(S₃₁)−φ(S₂₁)+180˚)
2110.0 ... 2155.0 MHz
-10
-7
10 degree
Output amplitude balance (|S₃₁/S₂₁|)
2110.0 ... 2155.0 MHz
-1.0
0.5
1.0 dB
IMD Product Level Limits
at f_TX = 1732.5 MHz f_RX = 2132.5 MHz³⁾
Blocker 1
400 MHz
Blocker 2
Blocker 3
Blocker 4
2 f_TX +400 MHz
f_TX -400 MHz
3 f_TX + 400 MHz
-123
-112
-114
-125
-106
-106
-109
-109
dBm
dBm
dBm
dBm
1) _{Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (6).}
2) _{Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.}
3) _{Power levels: 21 dBm Tx signal, -15dBm blocker at antenna port.}
Please read cautions and warnings and
important notes at the end of this document.
4 June 06, 2008