B72714D0200A060_08 Datasheet, PDF (21/22 Pages) EPCOS – CeraDiodes

CeraDiodes
Standard series
Operation
Use CeraDiodes only within the specified operating temperature range.
Use CeraDiodes only within specified voltage and current ranges.
Environmental conditions must not harm a CeraDiode. Only use them in normal atmospheric
conditions. Reducing the atmosphere (e.g. hydrogen or nitrogen atmosphere) is prohibited.
Prevent a CeraDiode from contacting liquids and solvents. Make sure that no water enters a
CeraDiode (e.g. through plug terminals).
Avoid dewing and condensation.
EPCOS CeraDiodes are designed for encased applications. Under all circumstances avoid ex-
posure to:
 direct sunlight
 rain or condensation
 steam, saline spray
 corrosive gases
 atmosphere with reduced oxygen content
EPCOS CeraDiodes are not suitable for switching applications or voltage stabilization where
static power dissipation is required.
CeraDiodes are designed for ESD protection only.
This listing does not claim to be complete, it merely reflects the experience of EPCOS AG.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 22