B72714D0200A060_08 Datasheet, PDF (2/22 Pages) EPCOS – CeraDiodes

CeraDiodes
Standard series
Features
ESD protection to IEC 61000-4-2, level 4
Bidirectional ESD protection in one component
No change in ESD protection performance at temperatures
up to 85 °C (temperature derating)
Use of parasitic capacitance for EMI suppression and
high-frequency filtering (replacement of additional MLCC)
High surge current capability
Low parasitic inductance
Low leakage current
Fast response time <0.5 ns
Lead-free nickel barrier terminations suitable for lead-free soldering
RoHS-compatible
Applications
Interfaces, data lines, power lines and audio lines, pushbuttons,
serial ports, ICs and I/O ports
Consumer electronic products (TV, DVD player/recorder, set-top
box, game consoles, MP3 player, digital still/video camera, etc.)
EDP products (desktop and notebook computer, monitor, PDA,
printer, memory card, control unit, head set, speaker, HDD, optical
drive, etc.)
Industrial applications
Design
Multilayer technology
Nickel barrier termination (Ag/Ni/Sn) for lead-free soldering
Marking
Due to the symmetrical configuration no marking information is
needed.
Single chip
4-fold array
General technical data
Maximum DC operating voltage
V_DC,max
5.6 ... 22
V
Typical capacitance
C_typ
22 ... 470
pF
Air discharge ESD capability
to IEC 61000-4-2 V_ESD,air
15
kV
Contact discharge ESD capability
to IEC 61000-4-2
V_ESD,contact
8
kV
Leakage current¹⁾
(V_leak = 5.6 V)
I_leak
1
µA
Operating temperature
(without derating) T_op
40/+85
°C
Storage temperature
T_stg
40/+125
°C
1) Except CDS2C05GTA and CDS3C05GTA Vleak = 3.3 V. Any operating voltage lower than Vleak results in lower leakage current.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 22