EN25S16A Datasheet, PDF (62/70 Pages) Eon Silicon Solution Inc. – 16 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector

EN25S16A
ABSOLUTE MAXIMUM RATINGS
Stresses above the values so mentioned above may cause permanent damage to the device. These
values are for a stress rating only and do not imply that the device should be operated at conditions up
to or above these values. Exposure of the device to the maximum rating values for extended periods of
time may adversely affect the device reliability.
Parameter
Storage Temperature
Plastic Packages
Output Short Circuit Current¹
Input and Output Voltage
(with respect to ground) ²
Value
Unit
-65 to +150
　C
-65 to +125
　C
200
mA
-0.5 to Vcc+0.5
V
Vcc
-0.5 to Vcc+0.5
V
Notes:
1. No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.
2. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may undershoot V_ss to –1.0V for periods of
up to 50ns and to –2.0 V for periods of up to 20ns. See figure below. Maximum DC voltage on output and I/O pins is V_cc + 0.5 V.
During voltage transitions, outputs may overshoot to Vcc + 2.0 V for periods up to 20ns. See figure below.
RECOMMENDED OPERATING RANGES ¹
Parameter
Value
Unit
Ambient Operating Temperature
Industrial Devices
-40 to 85
　C
Operating Supply Voltage
Vcc
Full: 1.65 to 1.95
V
Notes:
1. Recommended Operating Ranges define those limits between which the functionality of the device is guaranteed.
Vcc
+1.5V
Maximum Negative Overshoot Waveform
Maximum Positive Overshoot Waveform
This Data Sheet may be revised by subsequent versions
62
or modifications due to changes in technical specifications.
©2014 Eon Silicon Solution, Inc.,
Rev. B, Issue Date: 2014/04/15
www.eonssi.com