EN25S16A Datasheet, PDF (56/70 Pages) Eon Silicon Solution Inc. – 16 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector

Table 12. Parameter ID (0) (Advanced Information) 4/9
Description
Address (h)
(Byte Mode)
(1-1-2) Fast Read Number of Wait states
(dummy clocks) needed before valid
output
3Ch
(1-1-2) Fast Read Number of Mode Bits
(1-1-2) Fast Read Opcode
Opcode for single input opcode & address
3Dh
and dual output data Fast Read.
(1-2-2) Fast Read Number of Wait states
(dummy clocks) needed before valid
output
3Eh
(1-2-2) Fast Read Number of Mode Bits
(1-2-2) Fast Read Opcode
Opcode for single input opcode, dual input
3Fh
address, and dual output data Fast Read.
Address
(Bit)
00
01
02
03
04
05
06
07
15 : 08
16
17
18
19
20
21
22
23
31 : 24
Data
01000b
000b
3Bh
00100b
000b
BBh
EN25S16A
Comment
8 dummy clocks
Not Supported
4 dummy clocks
Not Supported
Table 12. Parameter ID (0) (Advanced Information) 5/9
Description
Supports (2-2-2) Fast Read
Device supports dual input opcode &
address and dual output data Fast Read.
Address (h)
(Byte Mode)
Reserved. These bits default to all 1’s
Supports (4-4-4) Fast Read
40h
Device supports Quad input opcode &
address and quad output data Fast Read.
Reserved. These bits default to all 1’s
Reserved. These bits default to all 1’s
43h : 41h
Address
(Bit)
00
01
02
03
04
05
06
07
31 : 08
Data
0b
Comment
0 = not supported
1 = supported
111b
1b
111b
Reserved
0 = not supported
1 = supported
(EQPI Mode)
Reserved
FFh
Reserved
This Data Sheet may be revised by subsequent versions
56
or modifications due to changes in technical specifications.
©2014 Eon Silicon Solution, Inc.,
Rev. B, Issue Date: 2014/04/15
www.eonssi.com