EN25QH16 Datasheet, PDF (62/62 Pages) Eon Silicon Solution Inc. – 16 Megabit Serial Flash Memory with 4Kbyte Uniform Sector

Revisions List
EN25QH16
Revision No Description
Date
A
Initial Release
2010/12/23
B
Rename 38h command from Enable Quad I/O (EQIO) to Enable Quad
Peripheral Interface mode (EQPI).
2011/01/03
C
Update Write Status Register Cycle Time from 10 (typ.) /15 (max.) ms to 15
(typ.) / 30 (max.) ms on page 50.
2011/01/19
D
Update Table 3. Protected Area Sizes Sector Organization on page 11.
2011/01/25
1. Update Read SFDP Mode and Unique ID Number (5Ah) description on
page 43.
E
2. Update Write Status Register Cycle Time (max.) from 30 ms to 50 ms 2011/04/15
on page 50.
3. Rename 24 Ball package from BGA to TFBGA.
1. Add the note “5. This flow cannot release the device from Deep power
down mode.” on page 16.
F
2. Correct the typo of 6 dummy clocks for EBh command on page 27. 2011/06/01
3. Update Read SFDP Mode and add Unique ID Number (5Ah) description
on page 43.
1. Update Figure 2. BLOCK DIAGRAM on page 4.
G
2. Update the Serial Flash Discoverable Parameters (SFDP) table on 2011/11/28
page 44, 45, 46, 47 and 48.
H
Update Unique ID Number from 64 bits to 96 bits on page 49.
2012/01/30
This Data Sheet may be revised by subsequent versions
62
or modifications due to changes in technical specifications.
©2004 Eon Silicon Solution, Inc.,
Rev. H, Issue Date: 2012/01/30
www.eonssi.com